Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
In a constant-head permeability test a sample of soil12 cm long and 6 cm in diameter discharged at 1.5*10^-3 of water in 10 minutes. The head difference in two piezometers A and B located at 1 cm and 11 cm, respectively, from the bottom of the sample is 2 cm. Determine the hydraulic conductivity of the soil. What is the soil type tested?
A square footing 6ft by 6ft is to be installed 6ft below ground level on a sand stratum. Standard penetration tests were conducted on the construction site
Determine the force in each member of the truss and state if it is in tension or compression. Set P=400 lb and d=4 ft.
A 20 kg box is on an upward inclined surface of 30 degrees from the floor. the velocity of the box is zero when it is subjected to a constant horizontal force F=30N. assuming the surface is smooth,
A 200ft length of steel wire is to carry a tensile load of 340lb. Find the minimum acceptable wire diameter if the maximum allowable stress in the wire is 30ksi, and the lengh of the wire must not increase by more than 2 inches when there is no ch..
A gunite concrete trapezoidal channel with 1:2 side slopes, as ilustrated below, conveys 60 m3/s on a slope of 0.0005. Compute the depth of flow.
Determine the minimum horizontal force necessary for 200 lb man to scale crevice (using his feet and back). The coefficient of static friction between his shoes and his back against the wall is 0.4.
Two monitoring wells were constructed in an unconfined aquifer. The wells are separated by a distance of 250 ft. The water surface elevations in the up-gradient and down-gradient wells were 101.00 and 100.85 ft, respectively.
A circular hatch, 2-m in diameter has its top 10-feet under water ( fresh water s.g. = 1.0), and is hinged on the bottom, and held closed on the top with a single bolt. Perform a moment balance about the hinge to calculate the force that the bolt mus..
The tank has an inner diameter of 1.5 m and a wall thickness of 18 mm. If the pressure in the tank is p=1.20MPa, determine the force in the 16 bolts that are used to attach the cap to the tank. Also, specify the state of stress in the wall of the ..
In a water table aquifer bounded on the ends by rivers, the hydraulic conductivity is 50 m/day. The hydraulic heads at x = 0 and x = 1000 m are 100 m and 90 m, respectively.
A hole is drilled in an aluminum plate with a steel drill bit whose diameter is 6.245 cm at 20 degrees Celsius. In the process of drilling, the temperatures of the drill bit and plate rise to 168 degrees Celsius.
determine the stresses in the steel and concrete under the service loads
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd