Determine the horizontal and vertical components

Assignment Help Civil Engineering
Reference no: EM13555007

A 2ft diameter hemispherical plexiglass "bubble is to be used as a special window on the side of an above-ground swimming pool. The window is to be bolted onto the vertical wall of the pool and faces outward, covering a 2ft diameter opening in the wall. The venter of the opening is 4ft below the surface. Determine the horizontal and vertical components of the force of the water on the hemisphere.

Reference no: EM13555007

Questions Cloud

What are the three materials based on the predominant types : What are the three meterials based on the predominant types of bond and what are the predominant types of bond in each category?
Determine what is the maximum height reached in meters : A ball is launched straight up with a speed of 25.05 miles per hour. What is the maximum height reached in meters
Find the acceleration due to gravity on surface of jupiter : jupiter has a mass that is roughly 320 times that of the earth and a radius equal to 11 times that of the earth. What is the acceleration due to gravity on the surface of jupiter
What is the pressure in the bottle when the bottle : A two-liter bottle is one-third full of water and two-thirds full of air. The air in the bottle has a gage pressure of 340 kPa. the bottle is turned upside-down and the cap is released so that the water is rapidly forced out of the bottle
Determine the horizontal and vertical components : A 2ft diameter hemispherical plexiglass "bubble is to be used as a special window on the side of an above-ground swimming pool.
How long will it take to raise the temperature of the water : 114.0 g of water is heated using 67.0 W of power with perfect efficiency. How long will it take to raise the temperature of the water from 15 C to 25 C
What is the speed of the other chunk : A 10.0 kg bomb is at rest. It explodes into two chunks. One piece of mass=3.00 kg goes east at 100 m/s. What is the speed of the other chunk
Find the total bulb power in w total bulb power lost : Find the Total bulb power in W Total bulb power lost as heat in W Total bulb power lost as heat in joules/second Total bulb power lost as heat in joules Garage air bolume in m^3 garage air mass in kg temperature change in K?
What is the shear on locking pin a and pivot pin : A carbon steel tank, 6ft. inside diameter X 10 ft. long with a 3/8 inch wall, is sitting on evenly spaced rolls and 4 evenly spaced supports (2 on each side). What is the horizontal force excerted on the supports? From the detail provided

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the change in its length and the change in its

The acrylic plastic rod is 200mm long and 15mm in diameter. If an axial load of 300N is applied to it, determine the change in its length and the change in its diameter. Ep = 2.70 GPa, Vp = 0.4.

  Compute the average linear velocity in m per s

An aquifer has a hydraulic conductivity of 12 ft/day and an effective porosity of 17% and is under a hydraulic gradient of 0.0055 m/m. A. Compute the specific discharge in m/s.

  Waterline of center of gravity

The ship has a total weight of 155,000 tons, length = 1,600 feet and a beam = 150 feet (assume that it is the shape of a rectangular box). Calculate the height above the waterline of its center of Gravity (G).

  Determine the activated sludge aeration volume required

Determine the activated sludge aeration volume required to treat 2.64 mgd with a BOD of 120 mg/l based on the criteria of a maximum BOD loading of 40 lb/1000 ft cubed/day and a minimum aeration period

  Design the flexural reinforcement for the member

A rectangular concrete beam of width b = 24 inches is limited by architectual considerations to a maximum total depth of h = 16 inches. it must carry a total factored load moment of Mu = 400 ft-kips.

  Determine the time required to bring the train to a stop

The subway train shown is traveling at a speed of 30 mi/hr in the west direction when the brakes are fully applied on the wheels of cars B and C, causing them to slide on the track, but are not applied on the wheels of car A.

  Determine what would be the expected flow velocity

A 12-in diameter concrete culvert (n=0.013) flows half full and is constructed on a grade of 0.5 %. What would be the expected flow velocity

  Principle of lateral continuity weve established that we

principle of lateral continuity weve established that we can correlate layers across distances but is it also possible

  Find magnitude and phase of all three line to line voltages

In a three phase balanced system, a delta connected source supplies power to a wye connected load. If the line impedance is 0.2 + j0.4 ohms, the load impedance 3 + j2 ohms, and the source phase voltage Vab = 208 at a 10 degree angle (V rms).

  Determine the force across the whole beam from the left end

A beam with a total length of 14m, has a 1000N load on the left end, 4m to the right (from the left end of the beam) there is a rolarr, 2m to the right of the rolar begins a 300 N/m load that goes for 4m, and the last 4m has a tapered load of 300 ..

  How many possible solutions for x and y

Consider the following two simultaneous equations :x^2 + y^2 = 42x + 3*y + 2*y^2= 6 How many possible solutions for x and y? Note: one solution is pair of (x,y) 8 2 1 4

  Determine the deflection angle to the last full station

Determine the deflection angle to the last full station on a horizontal curve with Da=3 degrees. The PI is located at station 12.20 and the central angle is 24 degrees.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd