Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A low-pass first-order instrument has a time constant of 20ms. Find the frequency,in hertz, of the input at which the output will be 93% of the dc out put.Find the phase angle at this frequency?
We have a balanced y-y system where the total power delivered to the Load is 1188 KW. wITH A lAGGING pOWER fACTOR OF 0.6. tHE LINE VOLTAGE AT THE LOAD IS 6600v. The line Impedance is 0.5+0.4j ohms.
Ib is 15uA in a circuit where an NPN transistor has an Av of 75 and VCE is 10 when Vcc is 25 and Beda DC is 75 and the Ic is 1.125mA, What would Rc be, assuming Ve=0
If you are now told that the material is copper and one cylinder has length 5 cms and radius 1mm, what is its resistance. You will have to locate the resistivity for copper and give me the reference source.
Suppose we have a 10-V-peak sinusoidal voltage source. Draw the diagram of a circuit that clips off the part of the sinusoid above 5-V and below -4V. The circuit should be composed of ideal diodes, dc voltage sources, and other components as neede..
The first stage is a common-emitter amplifier and the second stage is a common-collector stage. You should use one npn (2N3904) and one pnp transistor (2N3906) to design the circuit to meet the design criteria. Use the transistor datasheets to fin..
A pool of 200 frames exists for paging of processes A, B, C, D, and E. The processes' page sizes are 100, 200, 50, 150, and 500, respectively. Assuming proportional frame allocation is being deployed, how many frames are allocated to process D
Frequency multiplers are used at the transmitter to bring up the frequency level to the transmitter level frequency. Why don't we use the crystal oscillator to generate the transmitter level frequency
A coaxial line is filled with a very slightly lossy material with a relative dielectric constant of 5 The line would have a characteristic impedance of 100 ohm if it was air-filled. (a) What is the characteristic impedance of the dielectric-filled li..
The input signal (inflow minus outflow) to an integral process varies sinusoidally at a radian frequency, omega i. of 0.025 rad/s. The output signal varies sinusoidally at the same frequency with an amplitude of 10%.
In the lucky drift model for impact ionization, it is assumed that some lucky carriers are accelerated ballistically (i.e. without scattering) to energies above threshold, causing impact ionization. Assume that average relaxation time is 0.05 ps.
A 40 Ω Resistor, a 5mH inductor, and a 1.25μF capacitor are connected in series. The series-connected elements are energized by a sinusoidal voltage source whose voltage is 600 cos(8000t + 20°) V.
For each add instruction in this problem, assume that EAX contains the given contents before the instruction is executed, and give the contents of EAX as well as the values of the CF, OF, SF, and ZF flags after the instruction is executed.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd