Determine the flow discharge in the canal

Assignment Help Civil Engineering

Reference no: EM13546673

1.A trapezoidal canal with a bottom width of 1.5m, a side slope Z=1, has a longitudinal slope of 0.4% and n=0.025. If the water depth in section 1 is 1.52 m and in section 2, 592 m downstream of section 1, the water depth is 1.68 m, determine the flow discharge in the canal.

2.A concrete test cylinder 200 mm in diameter by 400 mm high is tested to failure. The compressive strain at failure is 0.0012. Determine the total amount the cylinder shortens before failure.

Reference no: EM13546673

Questions Cloud

What force is applied to the lid : A 22.5 cm screwdriver is used to pry open a can of paint. If the axis of rotation is 2.29 cm from the end of the screwdriver blade and a force of 79 N is exerted at the end of the screwdriver’s handle, what force is applied to the lid? Answer in unit..

What is the total mechanical energy of the oscillator : Consider a simple pendulum with L = 2.4 m and m = 1.8 kg. Suppose the mass is initially at rest at the lowest point on its trajectory when it is given an impulse such that it then has a velocity of 0.17 m/s. What is the total mechanical energy of the..

Maximum mass sign that can be hung from the beam : A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.9 kg and the sign has a mass of ms = 15.4 kg. The length of the beam is L = 2.57 m. The sign is attached at the very end of the beam, but the horizontal wire h..

What is the force the left support exerts on the beam : A gymnast with mass m1 = 49.0 kg is on a balance beam that sits on (but is not attached to) two supports. The beam has a mass m2 = 119.0 kg and length L = 5.0 m. Each support is 1/3 of the way from each end. Initially the gymnast stands at the left e..

Determine the flow discharge in the canal : A trapezoidal canal with a bottom width of 1.5m, a side slope Z=1, has a longitudinal slope of 0.4% and n=0.025. If the water depth in section 1 is 1.52 m and in section

What is the magnitude of the frictional force on the sphere : A solid sphere of uniform density starts from rest and rolls without slipping down an inclined plane with angle ? = 30.0o. The sphere has mass M = 8.0 kg and radius R = 0.19 m . The coefficient of static friction between the sphere and the plane is ?..

String routes through a hole in the center of the table : A 0.8 kg mass is moving in a circle of radius 1.5 m on a flat frictionless table at the end of a string. The speed of the mass is 3 m/s. The string routes through a hole in the center of the table and is held by you underneath the table.

Compute the settlement resulting from primary consolidation : A 3-m-thick, wide fill (γ = 19 kN/m3) is placed over a soil profile consisting of 6 m of plastic clay (γ = 16 kN/m3, e0, = 1.7, Cc, = 1.2, OCR= 1.4, Cr/Cc, = 0.15) over 10 m of organic silt

What is the amount of the deadweight loss : Kate and Alice are small-town ready-mix concrete duopolists. The market demand function is Qd = 20,000 - 200P, where P is the price of a cubic yard of concrete and Qd is the number of cubic yards demanded per year. Marginal cost is $80 per cubic yard..

User Account

All Pages