Determine the final equilibrium temperature of the blocks

Assignment Help Mechanical Engineering
Reference no: EM13629246

Two blocks A and B are initially at 100'C and 500'C, respectively. They are brought together and isolated from the surroundings. Determine the final equilibrium temperature of the blocks. Block A is aluminum (Cp = 0.900 kJ/kgK) with a mass of 05.kg and block B is copper (Cp = 0.386kJ/kgK) with mass of 1.0kg

Reference no: EM13629246

Questions Cloud

The combustion chamber on a jet has air entering at 2 kgs : the combustion chamber on a jet has air entering at 2 kgs and fuel enters through a fuel injector at .07 kgs. determine
A 2000 lbm automobile is driving down a level road at 70 : a 2000 lbm automobile is driving down a level road at 70 mph. the engine is disengaged and the automobile is allowed to
When delivering 10 amps to an external load the voltage : a battery can be modeled as an ideal source with an internal resistance - a constant voltage source with the resistor
A bullet weighing 50 grams and traveling at 200 ms is shot : a bullet weighing 50 grams and traveling at 200 ms is shot into a stationary block of wood weighing 4 kg where it
Determine the final equilibrium temperature of the blocks : two blocks a and b are initially at 100c and 500c respectively. they are brought together and isolated from the
A fan is used to accelerate quiescent air to a velocity to : a fan is used to accelerate quiescent air to a velocity to 12ms at a rate of 3m3min. if the density of air is 1.15kgm3.
A 1 kg projectile is shot straight up from the earths : a 1 kg projectile is shot straight up from the earths surface with a velocity of 100 ms and reaches a height of 300 m
Consider a person standing in a room at 18c determine the : consider a person standing in a room at 18c. determine the total rate of heat transfer from the person if the exposed
A closed system contains 2kg of air undergoes an isothermal : in a close stationary system 2 kg of argon is heated from 20 degree c to 120 degree c. determine the amount of heat

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the pressure of the water

determine the pressure of the water after the partition has been remived and enough heat has been transferred so that the temperature of the water is 3(degrees)C.

  If the volume of the air in the tank is 2 cubic meters find

an insulated rigid-wall tank contains air at 20 c and 2 bar. a paddle wheel located in the tank does work on the air in

  What is the average friction factor in the duct

Air enters an adiabatic duct of L/D = 40 at V1 = 170 m/s and T1 = 300 K. The flow at the exit is choked. What is the average friction factor in the duct?

  What is the effect of the propane addition on the mole

a system of propane and n-butane exists in two phase vapor liquid equilibrium at 10 bar and 323 k. the mole fraction

  Determine the maximum normal stress

Determine the maximum normal stress in a 300-mm diameter basketball that has a 2-mm wall thickness after it has been inflated to a pressure of.

  A r-12 plant is to develop 5 tons of refrigeration the

a r-12 plant is to develop 5 tons of refrigeration. the condenser and evaporator temperature are to be 40c and -10 c

  Steam enters a steady flow turbine at 30mpa 1000degc with a

steam enters a steady flow turbine at 30mpa 1000degc with a flow rate of 10kgs. thirty percent of the inlet mass of

  Assume constant specific heats where cwater 4179 kjkg-k

initially an insulated rigid tank contains 18.67 kg of water at 21.45oc and 101 kpa. the tank also contains a 3.66 kg

  Determine the latent heat of vaporization of the water vapor

How would you calculate the sensible heat, the latent heat, and determine the latent heat of vaporization of the water vapor in this air stream as the air is cooled from 170 F to 48 F?

  How many times larger a completely mixed reactor must be

a completely mixed chemical reactor has an in fluent flow with conc. 150 mgl of a and a flow rate of 100 galmin 380

  Calculate the work done during the process determine the

a piston-cylinder device initially contains 1.2 kg of steam with a volume of 0.2 m3. the mass of the piston is such

  Vinegar is a solution of acetic acid dissolved in water a

vinegar is a solution of acetic acid dissolved in water. a 5.54 g sample of vinegar was neutralized by 30.10ml of .100

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd