Determine the final enthalpy of leaving air

Assignment Help Mechanical Engineering

Reference no: EM13720710

A counter flow cooling tower operates steadily with 100 liter/sec of water that is cooled from 30 C to 25 C. The ambient air is at sea level pressure, 25 C dry bulb and 20 C wet bulb temperature. The ratio of mass flow rate to air flow rate is 1.0.

Determine:

a) the final enthalpy of leaving air and

b) the tower volume is H_dA_v = 0.50 kg/ s*m^3,

Using appropriate method of NTU

Reference no: EM13720710

Questions Cloud

Steam power plant operates on the reheat rankine cycle : A steam power plant operates on the reheat rankine cycle between 15 mpa and 10 kpa. System enters the high pressure turbine at 15 Mpa and 500c at rate of 12 kg/s. steam is then reheated at constant pressure to 500c befe it expands in the low pressure..

Material is then placed in a state of plane stress : A 0-45-90 rosette strain gage is placed on a material with E = 100GPa and v = 0.25. The material is then placed in a state of plane stress. Find Sigma x, Sigma y, Tau xy, Epsilon z, and largest principal stress

Expect transition to turbulence : For flow of viscous fluids through a 5 cm diameter pipe, for what flow rate in m3/h would we expect transition to turbulence?

System including a preheating coil and air washing : A system including a preheating coil and air washing (directly recalculated spray water) is to be designed to process 10,000 ft^3/min of outdoor air, in barometric pressure of 14.696 psia. Outdoor air is saturated at 30 F enters the preheated, where ..

Determine the final enthalpy of leaving air : A counter flow cooling tower operates steadily with 100 liter/sec of water that is cooled from 30 C to 25 C. The ambient air is at sea level pressure, 25 C dry bulb and 20 C wet bulb temperature. The ratio of mass flow rate to air flow rate is 1.0.

Compute the wet bulb temperature of moist air : Compute the wet bulb temperature of moist air that has been cooled and dehumanized from 25 C and 80 percent relative humidity to 23 C in a counter-flow spray dehumidifier. The water leaves at 15 C. (Use thermodynamic tables and Lewis number charts). ..

Amount of heat transfer from ball during the cooling process : A football official inflates a football to the required gauge pressure of 13 psi prior to a game. The football has an internal volume of 160in^3 and the air is at a temperature of 75 degrees F when the football is first inflated.

Determine the mass flow rate of the glycerine : An automotive radiator cools glycerine from 95 degrees C to 55 degrees C, Air flows through it, entering at 20 degrees C and leaving at 25 degrees C. If the radiator is designed to reject 25kW determine the mass flow rate of the glycerine

Generalized compressibility factor-residual property charts : Ammonia is to be isothermally compressed in a specially designed flow turbine from 1 atm and 672 R to 50 atm. If the compression is done reversibly, compute the heat and work flows needed per lb-mole of ammonia by the following methods;

User Account

All Pages