Determine the exit area of the nozzle

Reference no: EM13544735

Steam enters a nozzle operating at steady state with p = 40 bar and T =400oC, and a velocity of 10 m/s. The steam flows through the nozzle with negligible heat transfer and no significant change in potential energy. At the exit, p2 = 15 bar and the velocity is 605 m/s. The mass flow rate is 2 kg/s. Determine the exit area of the nozzle.

Reference no: EM13544735

Questions Cloud

What is maximum flow rate of the air in and out of the lungs : The rate of airflow into and out of the lungs can be approximated as a sine wave dV/dt = A sin 2?ft, where f is the breath frequency and t is the time. Determine the maximum flow rate A as a function of tidal volume of the lung, V_Total and the fr..

The current-density magnitude in a certain circular wire : The current-density magnitude in a certain circular wire is J = (2.75 × 10^10 A/m^4) r^2, where r is the radial distance out to the wire's radius of 3.00 mm. The potential applied to the wire (end to end) is 60.0 V. How much energy is converted to th..

Edge of the top of the building with an initial velocity : A rock is projected from the edge of the top of the building with an initial velocity of 12.2 m/s at an angle of 53 degrees above the horizontal. The rock strikes the ground a horizontal distance of 25m from the base of the building. Assume that t..

Lawnmowers coefficient of rolling friction : A gardener pushes a 20kg lawnmower whose handle is tilted up 37degrees above horizontal. The lawnmower's coefficient of rolling friction is 0.20. How much power does the gardener have to supply to push the lawnmower at a constant speed of 1.4m/s ? As..

Determine the exit area of the nozzle : Steam enters a nozzle operating at steady state with p = 40 bar and T =400oC, and a velocity of 10 m/s. The steam flows through the nozzle with negligible heat transfer and no significant change in potential energy. At the exit, p2 = 15 bar and the v..

Coefficient of static friction between the ladder : An 9.0 m, 240 N uniform ladder rests against a smooth wall. The coefficient of static friction between the ladder and the ground is 0.60, and the ladder makes a 50.0° angle with the ground. How far up the ladder can an 880 N person climb before the l..

Find the initial speed of the bullet : A 7.0 g bullet is fired into a 1.5 kg ballistic pendulum. The bullet emerges from the block with a speed of 200 m/s, and the block rises to a max height of 12 cm. Find the initial speed of the bullet.

Find the tension in the lower segment of the belt : An electric motor turns a flywheel through a drive belt that joins a pulley on the motor and a pulley that is rigidly attached to the flywheel as shown in the figure below. The flywheel is a solid disk with a mass of 61.5 kg and a radius R = 0.625..

A massless spring is hanging vertically and unloaded : A massless spring is hanging vertically and unloaded, from the ceiling. A mass is attached to the bottom end and released. How close to its final resting position is the mass after 1 second, given that it finally comes to rest 0.5 meters below the po..

User Account

All Pages