Determine the evaporation rate for a reservoir if the wind

Assignment Help Civil Engineering

Reference no: EM13563853

1.Determine the evaporation rate for a reservoir if the wind speed is 40 mph and the surface temperature is 15 degrees Celsius and the overlaying temperature is 25 degrees Celsius. and the relative humidity is 30 percent

2.Using the base units of the SI system, show that Netwon's law of gravitational attraction is a dimensionally homogeneous equation which gives F in newtons. Write with words and use equations.

Reference no: EM13563853

Questions Cloud

What is the final river temperature downstream : A toothpaste factory situated on a large river disposes of a waste water containing villiamite (NaF) to the river on a continuous basis. The minimum flow in the river is 210 m3/s, and the discharge rate from the treatment plant is 12.5 m3/s.

Determine the grade of the road : The natural water of a sample taken from a soil deposit was found to be 11.5%. it has been calculated that the maximum density for the soil will be obtained when the water content reaches 21.5%. Compute how many grams of water must be added to each 1..

What total volume of this soil is required to obtain : A construction site requires 35,000 yds^3 of soil in a compacted state with a moist unit weight of 126 pcf at a water content of 14%. if the uncompacted soil currently has a unit weight of 96 pcf and water content of 14%

Determine the gravitational force acting between two spheres : Determine the gravitational force acting between two spheres that are touching each other. The mass of each sphere is 400 kg and the radius is 300mm.

Determine the evaporation rate for a reservoir if the wind : Determine the evaporation rate for a reservoir if the wind speed is 40 mph and the surface temperature is 15 degrees Celsius and the overlaying temperature is 25 degrees Celsius. and the relative humidity is 30 percent

Determine the maximum value of the average : The frame shown consists of four wooden members, ABC, DEF, BE, and CF. Knowing that each member has a 2 3 4-in. rectangular cross section and that each pin has a 12 -in. diameter, determine the maximum value of the average normal stress (a) in member..

Determine the maximum negative moment in each span : A three span continuos beam has spans of 27, 30, 27 feet, total unfactored dead loads are 2,600 pounds per linear foot, unfactored live loads are 2,000 pounds per linear foot. For load combination 1.2D + 1.6L

Plot the shear and moment diagrams for the beam : Given simply supported beam with an overhang. The beam is 12 inches wide by 24 inches deep, and the slab is 6 inches deep. use a roof live load of 20 psf, and a concrete density of 150 pdf

How much sand did he place in the drum : A truck driver used sand to soak up a 1 g spill of lindane (C6H6Cl6). He placed the contaminated soil in an open drum which then filled with 150 L of water during a rainstorm. You test the water and find a concentration of 17 M.

User Account

All Pages