Determine the emissivity of the metal part

Assignment Help Mechanical Engineering
Reference no: EM131171355

The radiation from a metal part is measured with a pyrometer which indicates a temperature of 300?C. The actual part temperature is measured with a thermocouple which indicates 315?C. Both measurements have an uncertainty of ±1?C. From these measurements, determine the emissivity of the metal part and its uncertainty.

Reference no: EM131171355

Questions Cloud

Demonstrate social and cultural awareness : Demonstrate social and cultural awareness - Think creatively and critically.- What do you know about the author?
Calculate the voltage output of the series arrangement : The following junctions are connected in series: copper-constantan at 20?C, constantan-iron at 100?C, iron-constantan at 60?C, constantan-chromel at 15?C, and chromel-alumel at 20?C. Calculate the voltage output of the series arrangement.
Perform an analysis of an environmental issue : Perform an analysis of an environmental issue. A description of an environmental issue including the cause of the issue and its effects on the environment and people.
What is the process where wml cards request : What is the process where WML cards request the device to access WAP?
Determine the emissivity of the metal part : The actual part temperature is measured with a thermocouple which indicates 315?C. Both measurements have an uncertainty of ±1?C. From these measurements, determine the emissivity of the metal part and its uncertainty.
Construct the entire two complement scale : Construct the entire two's complement scale in which each value is represented by three bits?
Compare external influences on health care research : Explain how evidenced-based research influences the health care industry and compare external influences on health care research
Describe the scope of the projects and its objectives : Project Scope and Benefits: Describe the scope of the projects, its objectives, and the specific measurable impact it will have on the business or organizational results
Review the trend of the agency over the past five years : Review the trend of the agency over the past five years and prepare an analysis explaining the trend for expenditures. (Title this section Trend Analysis.)

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Air at -55 f 4 psia and m25 enters a constant area

air at -55 f 4 psia and m2.5 enters a constant area isentropic process and leaves the isentropic process at m0.2

  Determine the maximum shear stress in bar and in tube

A solid steel bar diameter d1 = 25.0 mm is enclosed by a steel tube of outer diameter d3 = 37.5 mm and inner diameter d2 = 30.0 mm. Determine the maximum shear stress in the bar and in the tube

  Based on work from your friend you assume that the

the following chemical reaction takes place in a bio reactor3a2b2 -gt2abab2the molecular weight of a is 10.0gmol and

  A locomotive car of mass 2000 kg traveling at a velocity

a locomotive car of mass 2000 kg traveling at a velocity v10msec is stopped at the end of tracks by a spring-damper

  Determine the steady-state temperature distribution in the

the edges of a thin plate are held at the temperature described below. determine the steady-state temperature

  What is the minimum number of 2m x 3m plates required for

a new cylindrical tank is being designed for seaworld where the 3m high plexiglass wall will be supported using i-beams

  Calculate the ratio of the axial strain

Calculate the ratio of the axial strain to the hoop strain, assuming that the deformation is elastic. Assume that E = 107 psi and υ = 1/3. Does the length of the tube increase, decrease, or remain constant?

  What kind of metals are often recommended

What kind of metals are often recommended for use at low temperatures, particularly when any sudden loading of the part is expected?

  Find the maximum velocity in the tube

Water at 27 C flows through a tube of diameter d = 50 mm. If the flow is fully-developed and has a mass flow rate of 0.01 kg/s, find the maximum velocity in the tube, and the pressure gradient, dp/dx

  Determine the second-law efficiency of the turbine

Steam enters an adiabatic turbine at 6 MPa, 600°C, and 80 m/s and leaves at 50 kPa, 100°C, and 140 m/s. If the power output of the turbine is 5 MW, determine (a) the reversible power output and (b) the second-law efficiency of the turbine. Assume t..

  Calculate first the temperature at the center of one face

a cube of aluminum 10 cm on each side is initially at a temperature of 300degc and is immersed in a fluid at 100degc.

  The figure below shows the geometrical stress concentration

the figure below shows the geometrical stress concentration factor k for a flat bar loaded in uniaxial tension. the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd