Determine the elevation and stationing of the low point

Assignment Help Civil Engineering
Reference no: EM13309363

A 1400-ft-long sag vertical curve (equal tangent)has a PVC at station 115 + 00 and elevation 750 ft. The initial grade is -3.5% and the final grade is +6.5%. Determine the elevation and stationing of the low point, PVI, and PVT?

Reference no: EM13309363

Questions Cloud

Find what is the flow in cfs if the pressure at 3 diameter : Oil (specific gravity 0.752) flows through a 6" horizontal pipe under a pressure of 60 psi. Assuming no losses, what is the flow in cfs if the pressure at a 3" diameter reduction is 20 psi
What is the highest possibledesign speed for the curve : The road has 12-ft lanes. Due toexpensive excavation, it is determined that a maximumof 34 ft can be cleared from the road's centerline toward the inside lane to provide for stopping sight distance.
Describe the changes in price and quantity : Describe the changes in price and quantity moving from one equilibrium to another. Be sure to identify what increases, what decreases, or what may do either.
Define reaction and explicitly state how the reaction define : The reaction 4PH3(g) -> P4(g) + 6H2(g) is found to be first order in PH3 with a rate constant of 1.6*10^-2 sec^-1 at 650 C. a)Give the rate law (rate equation) for the reaction and explicitly state how the reaction rate in this case would be defin..
Determine the elevation and stationing of the low point : A 1400-ft-long sag vertical curve (equal tangent)has a PVC at station 115 + 00 and elevation 750 ft. The initial grade is -3.5% and the final grade is +6.5%. Determine the elevation and stationing of the low point, PVI, and PVT
Determine what is the elevation of the curve at station : An equal-tangent crest curve connects a +2% initial grade with a -1% final grade, and is designed for 55mi/h. The station of the PVI is 233 + 40 with elevation 1203 ft. What is the elevation of the curve at station 234+00
State solutions act as buffers by placing a check in the box : Identify which of the following solutions may act as buffers by placing a check in the box next to the mixture. A. HNO3 , NaNO3 D. H2SO4, NaHSO4
Find where should the object be placed : An object with a height of 5cm is placed in front of a concave mirror that has a focal length of 12cm. where should the object be placed
Hopw to calculate the mass percentage of c and h : A 0.0989 g sample of an alcohol is burn in oxygen to yield 0.2160 g Co2 and 0.1194 g H2o. Calculate the mass percentage of C, H, and O in the compound

Reviews

Write a Review

Civil Engineering Questions & Answers

  Explain how to show the second derivative of theta

Two ships A and B are moving with constant speeds Va and Vb along straight intersecting courses. The navigator of ship B notes the time rates fo change of the separation distance r between the ships and the bearing angle theta.

  Estimate how far the contaminant would travel in 5 years

A contaminant in water is traveling through a saturated clay layer under a hydraulic gradient of 0.15. The clay has a hydraulic conductivity of 2 x 10^(-7) cm/s, a moisture content of 19%, and a Gs of 2.65.

  Determine what is the drag coefficient of a 3000-lb car

A 3000-lb car has a maximum speed (at sea level and on a level, paved surface) of 140 mi/h with 16-inch-radius wheels, a gear reduction of 3.5 to 1, and a drivetrain efficiency of 92%. It is known that at the car's top speed the engine is producin..

  Calculate the minimum required minimum wall thickness

A tubular aluminium bar (G=28GPa) of square cross section with outer dimensions 50mm x 50mm must resist a torque T=300Nm. Calculate the minimum required wall thickness t_min if allowbale shear stress is 20MPa

  Explain what criteria are used in the selection of personnel

What criteria are used in the selection of personnel for the demonstration of maintenance tasks? Define the criteria for the selection of test and support equipment.

  Factor of safety with respect to tensile failure

The maximum gage pressure is known to be 8MPa in a spherical steel pressure vessel having a 250mm diameter and a 6mm wall thickness. Knowing that the ultimate stress in the steel used is (sigma u)= 400MPa, determine the factor of safety with respe..

  Determine the magnitude r of the downward force

The guy wires AB and AC are attached to the top of the transmission tower. The tension in cable AB is 8.6 kN. Determine the required tension T in cable AC such that the net effect of the two cables is a downward force at point A.

  Problem related to specific gravity of solids

A soil specimen has a water content of 18% and a wet unit weight of 118.5 lb/cu. ft. The specific gravity of solids is found to be 2.72. Find the:

  What are 3 of the equivalent fixed-point problems

What are 3 of the equivalent fixed-point problems for f(x) = x2 - x -2=0?

  Calculate the density of air flow ate sections 1 and 2

Air flows steadily between two sections in a long, straight portion of 4 in. inside diameter pipe (D1=D2). The uniformly distributed temperature and pressure at each section are p1=100psia, p2=18.4psia, T1=540 R and T2=453 R.

  Find probability that a radndomly selected thermometer reads

assume the readings on thermometers are normally distibuted with a mean of 0C and a standard feviation of 1.00C. Find the probability that a radndomly selected thermometer reads greater than 1.23 and draw a sketch of the region.

  Determine what is the design speed of the curve

An equal tangent vertical curve connects a -2% and a +3% grade. The low point of the curve is at elevation 297.88 ft. If the PVI is at elevation 295 ft, what is the design speed of the curve

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd