Determine the discharge for shock-less entry

Assignment Help Civil Engineering

Reference no: EM13316767

A centrifugal water pump has an impeller with r1 = 4", r2 = 12", f1 = 160°, f2 = 170°. The impeller is 2" wide at the inlet end and ¾" at the outlet. For a speed of 1800 rpm, neglecting losses and vane thickness, determine the discharge (in ft3/sec) for shock-less entry (f1 = 90°), the Torque and the angle, f2 at the exit for the first problem in degrees.

Reference no: EM13316767

Questions Cloud

How long will take until the height is 1 m above the orifice : A tank with a 3m diameter has an 8 cm orifice at the bottom. The tank is currently filled with water to a height of 2.5m above the orifice. If the orifice is opened, how long will it take until the height is 1 m.

What is the change in the entropy of the water-steam mixture : A vessel which contains an ice-water mixture at 0C is in thermal contact with a water-steam mixture at 100 C. What is the change in the entropy of the water-steam mixture at 100C

Determine the time required for tank pressure to reach 50psi : An air compressor is used to pressurize a cylindrical tank which contains air at atmospheric pressure. The tank's diameter is 3 ft and it is 5 ft long. The supply line is 1 inch in diameter.

What bid price per widget : Your production costs are .6 cents per widget and you will have fixed costs of $800,000 per year. If your tax rate is 34% and your required return is 14%, what bid price per widget should you submit?

Determine the discharge for shock-less entry : A centrifugal water pump has an impeller with r1 = 4", r2 = 12", f1 = 160°, f2 = 170°. The impeller is 2" wide at the inlet end and ¾" at the outlet. For a speed of 1800 rpm, neglecting losses and vane thickness

What will be its velocity after the impact : A cannon ball (m=.7 kg) traveling at 200m/s hits and is impeded into a 400 kg car. If the car was initially at rest, what will be its velocity after the impact

What is the thermal coefficient of linear expansion : At room temperature (20C) the area of a hole in a sheet of material is 5.505 cm2. What is the thermal coefficient of linear expansion for the material

What steps make up the product life cycle : What steps make up the product life cycle? Include examples of the activities that occur during each step. What is the importance of the system safety function to an organi- zation? What are the differences between system safety and industrial safety..

Determine the mass flow rate through the system : A Brayton cycle with a regenerator uses air as the working fluid. The air enters the compressor at 283K and 0.1 MPa. The highest temperature in the cycle is 1073K and the pressure ratio across the compressor is 8.

User Account

All Pages