Determine the dimension of this proposed footing

Assignment Help Civil Engineering
Reference no: EM13317343

A proposed square footing carrying a total load of 500 kips is to be constructed on a uniform thick deposit of dense cohesionless soil. The soil's unit weight is 135 pcf, and its angle of internal friction is 38 degrees. The depth of the footing is to be 5 feet. Determine the dimension of this proposed footing, using a factor of safety of 3.

Reference no: EM13317343

Questions Cloud

What is the original speed of the father : A father racing his son has two-fifths the kinetic energy of the son, who has one-third the mass of the father. The father speeds up by 1.0 m/s, What is the original speed of the father
Why do unions emphasize the need for cohesiveness : Why do unions emphasize the need for cohesiveness? If employees vote to be represented, the employer and the union must bargain within the realities of the ______________ in which they operate.
Determine the time constant of the circuit : A capacitor is charged to a potential of 12.0 V and is then connected to a voltmeter having an internal resistance of 3.50M%u03A9. What is the time constant of the circuit
Find the piles axial capacity if k is assumed to be 7 : A 12-in. square concrete pile is driven into loose sand to a depth of 30 feet. Unit weight is 118 pcf, internal friction is 30 degrees. Find the pile's axial capacity if K is assumed to be 0.7 and the factor of safety is 2.
Determine the dimension of this proposed footing : A proposed square footing carrying a total load of 500 kips is to be constructed on a uniform thick deposit of dense cohesionless soil. The soil's unit weight is 135 pcf, and its angle of internal friction is 38 degrees.
Estimate the design capacity of the pile group : A pile group consist of four piles in cohesive soil. Each pile's diameter is 0.4 m, and center to center spacing is 1.2 m. The ultimate capacity of each pile is 300 kN. Estimate the design capacity of the pile group, using a factor of safety of 2
What is the x-component of the electric field at p then : a coaxial cable consists of a long straight filament surrounded by a long coaxial cylindrical conducting shell assume charge Q is on the filament zero net charge is on the shell and the electric field is E at a particular point P
Effort to unionize a company is often accompanied : Minimizing costs of inputs relative to the price of inputs is an important goal for. Elections in units where employees are not currently represented are called. The effort to unionize a company is often accompanied by

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the maximum deflection of collar b

Collar A is dropped 30 inches onto collar B, which is resting on a spring of constant k= 4 lb/in. Assuming perfectly plastic impact (coefficient of restitution e=0), determine the maximum deflection of collar B.

  What is effect of packing factor in self compacting concrete

what is effect of packing factor in self compacting concrete?

  Determine the service rate for six vehicles per minute

Vehicles begin to arrive at a toll booth at eight vehicles per minute from 9 A.M. to 10 A.M. The booth opens at 9:10 A.M. and services at a rate of ten vehicles per minute until 9:40 A.M. From 9:40 A.M. until 10 A.M.

  What is the diameter of the hole in the aluminum plate

A hole is drilled in an aluminum plate with a steel drill bit whose diameter is 6.245 cm at 20 degrees Celsius. In the process of drilling, the temperatures of the drill bit and plate rise to 168 degrees Celsius.

  Determine its velocity for t along a straight line

A particle moving along a straight line is subjectd to a deceleration a=(-2v^3)m/s^2 where v is in m/s. If it has a velocity v=8 m/s when t=0, determine its velocity when t=4s.

  Determine what is the volume change of the tube

a circular aluminum tube of L=600 mm is loaded in compression by forces P. The outside and inside diameters are d2=75 mm and d1=63mm, respectively. A strain Gage is placed on the outside of the tube to measure normal strains in the longitudinal di..

  Calculate the difference in elevation from a to b

In trigonometric leveling from point A to point B, the slope distance and the zenith angle measured in A were 2504.897 m and 85o08'54". At B, these measurements were 2504.891 m and 94o52'10" respectively.

  Determine how man n of water must be added to the sample

A moist soil sample weighing 22.2 N has a moisture content of 20%. How man N of water must be added to the sample to increase the moisture content to 30%

  How much benzene can be optimally removed by the gac filter

A municipal water supply became contaminated with benzene (Cw=50g/L). It was decided that until the contaminant source could be identified and remediated, all household faucets would be fitted with a granular activated carbon(GAC) filter bed to ad..

  Determine void ratio and dry unit weight of compacted sample

A soil sample is prepared in the laboratory by mixing a certain amount of dry soil with 10.5 wt% water. The relative density of the grains of the material is equal to 2.7.

  Determine the room temperature when the student comes back

A NCSU student turned on his/her 150 W fan inside his/her room, 4m * 6m * 6m, before going to class in the morning of a summer day, excepting to find his/her room cooler when he/she returns at night.

  Explain how to classify the column as slender or non slender

Assume that at one end of the column a clockwise moment of 100 k-ft is present, and that at the other end of the column a counter-clockwise moment of 25 k-ft is present. you may assume that k= 1.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd