Determine the diameter of the nozzle

Assignment Help Mechanical Engineering
Reference no: EM13950548

1. Carbon dioxide is contained in a large tank, initially at 100 lbf/in.2, 8008R. The gas discharges through a converging nozzle to the surroundings, which are at 14.7 lbf/in.2, and the pressure in the tank drops. Estimate the pressure in the tank, in lbf/in.2, when the flow first ceases to be choked.

2. Steam expands isentropically through a  converging nozzle operating at steady state from a large tank at 1.83 bar, 2808C. The mass flow rate is 2 kg/s, the flow is choked, and the exit plane pressure is 1 bar. Determine the diameter of the nozzle, in cm, at locations where the pressure is 1.5 bar, and 1 bar, respectively.

Reference no: EM13950548

Questions Cloud

Four general forces in the societal environment : Define a value chain and the significance of the center of gravity. Please also provide an example of a value chain from your place of work or from a company
What value does a business plan create : Discussion Question- What value does a business plan create for the initiation of a social enterprise
Isentropic flow through the nozzle : An ideal gas mixture with k 5 1.31 and a molecular weight of 23 is supplied to a converging nozzle at po 5 5 bar, To 5 700 K, which discharges into a region where the pressure is 1 bar. The exit area is 30 cm2. For steady isentropic flow through t..
Identify the rules pertaining to the carryover of tax : Identify the rules pertaining to the carryover of tax attributes in a corporate reorganization.
Determine the diameter of the nozzle : Steam expands isentropically through a  converging nozzle operating at steady state from a large tank at 1.83 bar, 2808C. The mass flow rate is 2 kg/s, the flow is choked, and the exit plane pressure is 1 bar. Determine the diameter of the nozzle,..
Compare and contrast the format and uses of formal and : For this discussion, compare and contrast the format and uses of formal and informal reports. Describe an example of either a formal or informal report that you have used or perhaps even written in the workplace, or locate a report via an Internet se..
Create java application containing array that stores 2 value : Create a JApplet with a JButton labeled "Who's number one?". When the user clicks the button, display your favorite sports team. Save the file as JNumberOne.java.
Determine the critical pressure : 1. For the isentropic flow of an ideal gas with constant specific heat ratio k, the ratio of the temperature T* to the stagnation temperature To is T*/To 5 2/(k 1 1). Develop this relationship.
Relevance of policy and evaluation for festival : How do we know whether policy interventions in the realm of events are effective in achieving the desired outcomes and discuss and demonstrate an understanding of basic theoretical concepts and themes in the study and application of event policy a..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Residual stresses parallel and perpendicular

For unstrained material, a = 2.8610. Find the values of the residual stresses parallel and perpendicular to the weld. Assume E = 30 × 106 psi, υ = 0.29, and that the stress normal to the plate is zero.

  Determine the throat pressure kpa and temperature k the

air from a compressor discharges at a constant rate through a converging-diverging nozzle to the ambient. the inlet

  The final temperature

1. Water vapour at 90kPa and 150°C enters a subsonic diffuser with a velocity of 150m/s and leaves the diffuser at 190kPa with a velocity of 55m/s and during the process 1.5 kJ/kg of heat is lost to surroundings. Determine (i) The final temperature (..

  What is the view factor when the smaller sphere is displaced

Determine the view factors F12 and F21 for two concentric spheres characterized by radii R1 and R2, where R2 > R1. What is the view factor when the smaller sphere is displaced from the origin by R1/2 and R2 > 4R1?

  If the relationship between pressure and volume during the

a gas initially at p1 1 bar and occupying a volume of 1 liter is compressed within a piston-cylinder assembly to a

  What four processes make up the ideal rankine cycle what is

question 1 what four processes make up the ideal rankine cycle? what is happening in an actual power plant during the

  Determine the boundary work and the heat transferred tofrom

a cylinder fitted with a piston contains 10 lbm of r-134a at 100 psia and 140 degree f. the refrigerant is cooled at

  Assume that in orthagonal cutting the rake angle is 20

assume that in orthagonal cutting the rake angle is 20 degrees and the friction angle is 35 degrees at the chip-tool

  Volumetric flow rate-slip factor using stadolas equation

A centrifual pump is used to raise water against a static head of 18 m. The suction and delivery pipes, both .15m in diameter, have respectively, friction head losses amounting to 2.25 and 7.5 times dynamic head. The impeller, which rotates at 1450 r..

  Elevation and the flow velocity

If the flow rate through the pump is 18 L/s and the changes in elevation and the flow velocity across the pump are negligible, the overall efficiency of the pump is

  Compute the tension in the cable

The solid concrete cylinder 6 ft long and 4 ft in diameter is supported in a half-submerged position in fresh water by a cable which passes over a fixed pulley at A. Compute the tension T in the cable. The cylinder is waterproofed by a plastic coa..

  Determine isentropic efficiency of the compressor

Carbon dioxide enters an adiabatic compressor at 100kPa and 300K at a rate of 0.5kg/s and exits at 600kPa and 450K. Considering constant specific heat, determine (a) isentropic efficiency of the compressor (b) the rate of entropy change in (kW/K) ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd