Determine the current amplitude

Reference no: EM13321124

a 200 ohms resistor and a .4 H inductor are connected in series with a voltage source having amplitude of 30 v and oscillating with an angular frequency of 250 rad/sec.

A) What is the empedance of the circuit?

B) what is the current amplitude?

C) What is the voltage amplitude across the resistor and the voltage amplitude across the inductor?

D) what is the phase angle of the source voltage with respect to the current?

Reference no: EM13321124

Questions Cloud

What is the additional weight of water per unit volume : A Proctor compaction test in the laboratory on a borrow pit soil gives a maximum dry unit weight of 19 kN/m3 and optimum water content of 11.5%. The bulk unit weight and water content of the soil in the borrow pit are 17.2 kN/m3

What distance is this in the muons frame : Suppose a muon produced as a result of cosmic ray colliding with a nucleus in the upper atmosphere has a velocity v = 0.9500c. What distance is this in the muon's frame

Explain how many cars are now driving on the highway : At rush hour, the noise from a highway is 1.0 *10^-4 W/m^2 with 100 cars passing a given point a minute. At night the average noise is reduced to 1.0*10^-6 W/m^2. How many cars are now driving on the highway.

Determine the minimum time needed for the plate temperature : Consider a 1000-W iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-T6 (density = 2770 kg/m^3 and c(p)=875 J/kg C). The base plate has a surface area of 0.03 m^2.

Determine the current amplitude : a 200 ohms resistor and a .4 H inductor are connected in series with a voltage source having amplitude of 30 v, what is the current amplitude

Describe the impact of culture on managerial decision-making : Describe the impact of culture on managerial decision-making.

Explain the square of the concentration of the halide : Although the mechanism of the coupling process is not well understood, it is known that ratre appears to depend on the square of the concentration of the halide.

Determine the settlements when a stress of 60 kpa : The soil properties are Cc = 0.4, Cr = 0.1 and fsat = 18 kN/m3 for both clays, and the water table is 1 m below the soil surface. Determine the settlements when a stress of 60 kPa is applied by the building.

Which base course aggregate has a target dry density : Base course aggregate has a target dry density of 119.7 Ib/cu ft in place. It will be laid down and compacted in a rectangular street repair area of 2000 ft by 48 ft by 6 in.

User Account

All Pages