Determine the combined amounts of water evaporated

Assignment Help Civil Engineering
Reference no: EM13540185

1.In a given year, a 10,000 mi2 watershed received 20 inof precipitation. The average rate of flow in the river draining the area was found to be 6000 cfs, while groundwater and infiltration losses over the period were estimated to be 0.6inches. Determine the combined amounts of water evaporated and transpired from the region during the year of record. Report answer in inches.

2.Helium (Hrom an intie) at a rate of 1.5 lbm/s is compressed inan adibatic compressor from an intial condition of 70 F, 14.7 Psiato final condtion of 1070 F, 147 Psia. Determine:

a. The power required to run his compressor

b. The isentropic efficiency of this compressor

c. The T-s Diagram

d. The entropy generation for this process

Reference no: EM13540185

Questions Cloud

Find the moment of inertia around the x-axis and y-axis : Using a unit analysis, calculate the value of the K term in the rational method equation (Q = K C I A) in English and SI respectively.
What rate must heat be supplied to this engine : A completely reversible heat engine operates with a source at 1500 R and a sink at 500 R. At what rate must heat be supplied to this engine, in Btu/h, for it to produce 5 hp of power?
Determine the solids retention time : Using the following assumptions, determine the solids retentiontime, the cell wastage flow rate, and the return sludge flow ratefor the Jambalaya shrimp processing plant WWTP.
What is the change in centimeters : The evaporation rate from the surface of a 3,650-acre lake is 100 acre-ft/day. Estimate the depth change in the lake in feet during a 1-year period if the net inflow to the lake is 25 cfs. Is the depth increasing or decreasing? What is the change in ..
Determine the combined amounts of water evaporated : Helium (Hrom an intie) at a rate of 1.5 lbm/s is compressed inan adibatic compressor from an intial condition of 70 F, 14.7 Psiato final condtion of 1070 F, 147 Psia. Determine:
The detention time should be 60 seconds with a velocity : A circular rapid-mix basin with stator blades is to be designed totreat 2.0 million gallons of water per day. The detention times hould be 60 seconds with a velocity gradient of 900s-1
At what height in the resevoirmust the water level be kept : Water at 20 Degree C is pumped at a constant rate of 9m^3/h from a large resevoir resting on the floor to the open top of a anexperimental absorption tower.
Find e in terms of b and h to have one type of normal stress : For arectangular section (b(width) x h(thickness) that is subjected to aforce P that is applied at an eccentricity (e) measured from thecenter of area of the rectangle in the h(thickness)direction
Determine the normal stress in a basketball of 12 inches : Determine the normal stress in a basketball of 12 inches diameter and 0.1 inch wall thickness which has been inflated to a gage pressure of 15psi.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the flow rate of water through the channel

The flow rate of water flowing in a 3m wide channel is to be measured with a sharp-crested triangular weir 0.5m above the channel bottom with a notch angle of 60°. If the flow depth upstream from the weir is 1.5m

  Determine total amount the cylinder shortens before failure

A concrete test cylinder 200 mm in diameter by 400 mm high is tested to failure. The compressive strain at failure is 0.0012. Determine the total amount the cylinder shortens before failure.

  How will alum floc described in part d need to enter basin

A water treatment plant with a maximum daily flow of 4.4 m3/s is treating surface water with a minimum ambient temperature of -1°C (30°F). The water is coagulated with alum and the alum floc was measured to have a settling velocity of 1.6 m/h at 1..

  Determine what will be the discharge q at a depth

If sewage (assume the properties are the same as those of water) flows at a depth of 1.5ft in the pipe, what will be the discharge Q = 10.6 cubic feet/second

  Compute original length if deformation is totally elastic

A cylindrical specimen of a metal alloy is stressed in compression. if its original and final diameters are 40.00mm and 40.10mm respectively, and its final length is 120.00mm, compute its original length (L1) if the deformation is totally elastic.

  Determine max pressure at bottom of gate 2

Find max pressure at bottom of gate (psi) 2. Total horizontal force on gate 3. moment about the bottom of the gate

  What investment can be justified for the new surface

Annual maintenance cost for a particular section of highway pavement are $2000. The placement of a new surface would reduce the annual maintenance cost to $500 per year for the first 5 years and to $1000 per year for the next 5 years.

  Conveyor system experiences continued operation

Given that the minimum footing size is 2(m) x 2 (m), design the foundation so that the conveyor system experiences continued operation.

  Estimate number of raccoons that attempted to cross highway

nighttime traffic on a single lane of rural highway is light, with a flow of 40 vehicles/hour , and is well described by a Poisson arrival process. A racoon dashes across the road, without looking at a speed of 12 mph.

  How to compute the saturated unit weight of the silt

All the silt is saturated even after the water table is lowered. (In this problem, treat the unit weight above the water table as bulk unit weight and the unit weight below the water table as saturated unit weight.)

  What amount of water use is exceeded with the probability

Suppose the summer daily demand for water use in Phoenix is normally distributed with a mean of 310 million gallons/day and a standard deviation of 45 million gallons/day. Also suppose the city has reservoirs whose combined storage is 350 million ..

  Determine what is the bettle stations impact speed

A separatist Droid Army bettlestation is damaged during an intense battle over Coruscant, and it begins to fall towards to planet with an acceleration of s' = -gR^2/s^2 where s is the bettlestation's distance from Coruscant's center

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd