Determine the appropriate line size

Assignment Help Mechanical Engineering

Reference no: EM13708099

Linseed oil is to be pumped at a flow rate of 12gpm over a distance of 18m. The allowable pressure drop is 15 psi. Centrifugally spun cast iron is to be used as a pipe material. Determine the appropriate line size.

Reference no: EM13708099

Questions Cloud

Opened and half of the mass of the gas is allowed to escape : A rigid tank contains 5.56 kg of an ideal gas at 3.6 ATM and 40 degrees Celsius. Now a valve is opened and half of the mass of the gas is allowed to escape. If the final pressure in the tank is 2.0 ATM, the final temperature of the tank is?

Contained in a cylinder fitted with a piston : Argon gas initially at 140 kPa, 10C is contained in a cylinder fitted with a piston. The initial volume of the gas is 0.2m^3. The gas is now compressed in a poly tropic process, PV^(1.4)=constant, to a final pressure of 700 kPa assuming ideal gas beh..

Find equation for the steady state temperature distribution : A very large vertical steel plate that is 1 cm thick is inductively heated with internal heat generation rate of 2x10^9 W/m3 . The plate is initially at 20°C, and the left and right surfaces are kept at 20Â°C throughout the heating process.

Temperature difference between the hot and cold streams : A vortex tube is used to separate an ideal gas at 10 bar and 375 K such that half the gas is collected in a cool stream at 1 bar and 255 K and the other half becomes a hot stream at 1 bar and 495 K. Assuming the process is adiabatic: is this process ..

Determine the appropriate line size : Linseed oil is to be pumped at a flow rate of 12gpm over a distance of 18m. The allowable pressure drop is 15 psi. Centrifugally spun cast iron is to be used as a pipe material. Determine the appropriate line size.

Difference between stagnation and static pressure : Pressure taps in a low speed wind tunnel reveal the difference between stagnation and static pressure to be .5 psi. Calculate the test section air velocity under the assumption that the air density remains constant at .0765 lbm/ft^3

Cylinder with a piston restrained by linear spring contains : A cylinder with a piston restrained by a linear spring contains 2kg of carbon dioxide at 500 kPa, 400 C the system is now cooled to 40C, at which point the pressure is 300 kPa. You may assume ideal gas behavior with constant specific heat value Cv=0...

Spherical balloon-determine the final temperature : A spherical balloon contains 2 kg of water at 200C, 500 kPa. The ballon material as elasticity such that the pressure inside is always proportional to the balloon diameter. The water is now allowed to cool until the volume is one-held the initial vol..

Piston-cylinder assembly which initially has a volume : A piston-cylinder assembly which initially has a volume of 1 m^3 is filled with 0.7 kg of air. The pressure on the air is always maintained at 1.2 bars. Heat transfer is allowed to take place until the volume is 60 percent of the initial value. You m..

User Account

All Pages