Determine the allowable length of the penstock

Assignment Help Civil Engineering

Reference no: EM13536785

1.The bracket ABC can be supported in the eight different ways shown. All connections consist of smooth pins,rollers, or short links. For each case, answer the questions listed in Prob.4.59,and, whenever possible , compute the reactions,assuming that the magnitude of the force P is 100 lb.

2.A pumped storage power plant is to be designed for a flow rate of 6,000 cfs per penstock. The penstocks are 20 ft. in diameter, with a relative roughness of 0.008. The elevation difference between the two reservoirs is 340 ft. The head loss has to be less than 2% of the head available from the pump.

a.) Determine the allowable length of the penstock.

b.) Determine the HP of the pump required to pump the water.

Reference no: EM13536785

Questions Cloud

How political and legal systems affect international busines : How political and legal systems affect international business

Determine the eccentricity of the orbit : A satellite is launched 600 km from the surface of the earth, with an initial velocity of 8333.3 m./s, acting parallel to the tangent of the surface of the earth. Assuming the radius of the earth to be 6378 km and that is 5.976 * 10^6 kg, determine t..

Positioning are interrelated activities : Segmentation, targeting and positioning are interrelated activities

Determine the components and magnitudes of the vectors ab : In order to move a wrecked truck, two cables are attached to the truck at A and pulled by winches B and C as shown. Determine the components and magnitudes of the vectors AB and AC

Determine the allowable length of the penstock : The bracket ABC can be supported in the eight different ways shown. All connections consist of smooth pins,rollers, or short links. For each case, answer the questions listed in Prob.4.59,and, whenever possible

How large must the lagoon be to achieve a concentration : A completely mixed aerated lagoon (batch reactor) is to be used. How large must hte lagoon be to achieve a concentration of effluent that is 50 mg/L

What is the required detention time and tank : A chlorination process is to be used to disinfect a wastewater treatment plant effluent. The plant treats 1.8MGD (million gallon per day). The water entering this unit has about 4500mg/L of coliforms, and the effluent target is 0.1 mg/L of coliforms.

What are the bearings of the sides : Why is the torque on A and the torque on AB opposite? Wouldn't they be the same? How do we know which direction the torque is applied at A to begin with? It's not specified.

What is the resulting solids concentration : Raw primary sludge at a solids concentration of 3% is mixed with waste activated sludge at a solids concentration of 6,000 ppm. The flows are 20 and 25 gal/min, respectively. What is the resulting solids concentration?

User Account

All Pages