User Account

All Pages

Determine temperature at the end of the fin

Assignment Help Mechanical Engineering
Reference no: EM13963915

An aluminium alloy fin of 7 mm thick and 50 mm long protrudes from a wall, which is maintained at 120?C. The ambient air temperature is 22?C. The heat transfer coefficient and conductivity of the fin material are 140 W/m2K and 55 W/mK respectively.

Determine

1. Temperature at the end of the fin.

2. Temperature at the middle of the fin.

3. Total heat dissipated by the fin.

Reference no: EM13963915

Questions Cloud

Ounce of the true population mean : However, the mean ounces of ?ll μ may change from day to day, because of change of operator or adjustments in the machine. If n = 55 observations on ounces of ?ll are taken on a given day, ?nd the probability that the sample mean will be within 0...
Find the probability density function : Let X1,..., Xn be a random sample from the uniform distribution f(x) = 1/2, 0 ≤ x ≤ 2. Find the probability density function for the range R = (X(n) - X(1)).
As the volume decreases the pitch goes up. : The bottle is acting as a Helmholtz resonator. This is the same phenomenon that acts when you blow across the top of the bottle.
Probability that the longest time interval : (i) what is the probability that the longest time interval between calls is less than 15 minutes? (ii) What is the probability that the shortest time interval between calls is greater than 5 minutes?
Determine temperature at the end of the fin : Determine temperature at the end of the fin and determine temperature at the middle of the fin.
Find the electric potential at point c. : Is there a point along the line joining charges qA and qB where if you placed charge qC it will experience no acceleration? If so, where? Specify the distance to qA.
Discuss the agents of socialization involved in transmission : Discuss the agents of socialization involved in the transmission of the three interesting aspects you chose. Finally, how does each of these aspects affect the development of self for members of the group?
Find the critical thickness of insulation : Find the critical thickness of insulation. And also find the percentage of change in the heat transfer rate if the critical radius is used.
Data represent systolic blood pressure : The following data represent systolic blood pressure readings on 10 randomly selected females between ages 40 and 82.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Transportation alternatives for a bus depot

Problem 1: A small city four transportation alternatives for a bus depot based on three criteria: architectural worth, cost and public opinion. The serviceable life of the depot is 40 years.

  Show that the radial outlet velocity at the impeller tip is

consider a double-sided centrifugal compressor with the following design parametersoutlet diameter of impeller 50

  Determine the entropy change of the surrounding will this

in a piston cylinder device 5kg of air at 200kpa and 227oc is compressed to 500kpa at 100oc. determine the entropy

  A 250 g 230-cm-diameter plastic disk is spun on an axle

a 250 g 23.0-cm-diameter plastic disk is spun on an axle through its center by an electric motor. what torque must the

  Kinetic and potential energy effects can be neglected

one-half kg of refrigerant-22 is contained in a piston-cylinder assembly initially saturated vapor at 5bar. the

  What is the required wheel diameter to overcome

an industrial water shutoff valve is designed to operate with 30 lb of effort force. The valve will encounter 200 lb of resistance force applied to a 1.5 in. diameter axle. what is the required wheel diameter to overcome the resistance force?

  Prospective occupants an important consideration

Is the number of prospective occupants an important consideration in the design of heating and cooling systems for classrooms? Explain.

  The radius of the curvilinear path is 4 in what is the

the position of a particle moving in a curvilinear path is given by thetacos2t where theta units are radians and t

  What is required actual mechanical advantage of system

An Industrial water shutoff valve is designed to operate with 30lbs of force and will encounter 200lbs of resistance force applied to a 1.5in diameter axle. What is the required actual mechanical advantage of the system?

  Determine the velocity of the block after 5 seconds assume

a force f 12t where t is in seconds is applied to a 2kg box at rest on a horizontal surface uk .3 for 5 seconds.

  Determine the flowrate do you think this pump is a good

a centrigugal pump having a 6-in-diameter impeller and the characteristics is to be used to pump gasoline through a

  Neglect air and road friction

A ford ranger with a mass of 2410 kg is traveling at a velocity of 65 mph down a mount ion road in Colorado. The brakes fail and the driver elects to use a "run away" truck tramp to stop the pickup. What distance in feet will it travel if the ramp ha..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd