Determine net radioactive heat transfer from each surface

Assignment Help Mechanical Engineering

Reference no: EM13703051

A cylindrical furnace is 0.4 m long and 0.4 m in diameter. The two ends are maintained at 600 K and 700 K with emissivities of 0.6 and 0.7 respectively. The lateral surface has an emissivity of 0.8 and a temperature of 800 K. Determine the net radioactive heat transfer from each surface.

Reference no: EM13703051

Questions Cloud

Find the tension in the towrope at this speed : An accelerating car develops 15 kW at a speed of 30 km/h on a level roadway, when towing an identical vehicle whose engine is out of action. Find the tension in the towrope at this speed, if each car has a constant attractive resistance of 650 N

Kinetic and potential energy effects are negligible : Liquid octane (C8H18) at 77F, 1 atm enters a combustion chamber operating at steady state and burns completely with 50% excess dry air entering at 120F, 1 atm. The products exit at 1060F, 1 atm. Determine the rate of heat transfer between combustion ..

Air from a workspace enters the air conditioner : Air from a workspace enters the air conditioner unit at 30C dry bulb and 20C wet bulb. The air leaves the air conditioner and returns to the space at 20C dry bulb and 6.5C dew point temperature. If there is any, the condensate leaves the air conditio..

Determine the density of refrigerant : Determine the density of Refrigerant-12 at 3MPA and 200 degrees celcius by using the principle of corresponding states.

Determine net radioactive heat transfer from each surface : A cylindrical furnace is 0.4 m long and 0.4 m in diameter. The two ends are maintained at 600 K and 700 K with emissivities of 0.6 and 0.7 respectively. The lateral surface has an emissivity of 0.8 and a temperature of 800 K. Determine the net radioa..

Minimum wall thickness of pole after incorporating factor : Erected a new sign welcoming people to the campus. The sign is painted on a rectangle of graphite reinforced epoxy which will not bend and measures 3 ft high and 5 ft wide. This sign is fastened along its 3 ft side to a hollow 2014-T6 aluminium (allo..

Air standard diesel cycle has a compression ratio : An air standard Diesel cycle has a compression ratio of 15, and the heat transferred to the working fluid per cycle is 800 Btu/lbm. At the beginning of the compression process the pressure is 14.7 lb/in^2 and the temperature is 60 F. Determine the pr..

Determine the rate of energy transfer from the air to water : Water enters one stream of an unmixed stream heat exchanger at 20°C and increases in temperature by 10°C. Air enters the second stream on the heat exchanger at 400°C and 5 kg/s. The air temperature at the exit of the heat exchanger is 200°C cooler th..

Determine the shear and moment diagrams : Consider a simply supported beam of length 50ft subjected to a uniformly distributed downward load of 10kips/ft from x=10ft to x=40ft and concentrated downward loads of 100kips at x=10ft and x=40ft.

User Account

All Pages