Determine its changes in kinetic and potential energy

Assignment Help Civil Engineering

Reference no: EM13545585

An automobile having a mass of 900 kg initially moves along a level highway at 100 km/hr relative to the highway. It then climbs a hill whose crest is 50m above the level highway and parks at a rest area located there. For the automobile, determine its changes in kinetic and potential energy, each in kJ. For each quantity, kinetic energy and potential energy, specify your choice of datum and reference value at that datum. Let g = 9.81 m/s2

Reference no: EM13545585

Questions Cloud

What is the minimum required length l of the rod so that the : What is the minimum required length L of the rod so that the cross section at one end can be rotated 90 degree with respect to other end without exceeding the allowable shear stress of 300 MPa

Find the principle stresses and max shearing stresses : A circular beam length 36 inches and diameter 1 inch is supported on the left end by a pin joint and the right end with a roller. The beam is under axial tension with forces of 1000 lbs out of each end.

To orient a transit in azimuth when the transit is set up : To orient a transit in azimuth when the transit is set up over a point D, a backsight is taken to another point, C, with vernier A set at the azimuth of the line CD and with the telescope in its inverted position

Find index r and recurrence relation compute : You will be using a large crane... lets say one with a capacity of 30T. What considerations need to be made prior to picking up a 15T load with the crane? If you are familiar with the use of a crane be sure to include the discussion of the outriggers..

Determine its changes in kinetic and potential energy : An automobile having a mass of 900 kg initially moves along a level highway at 100 km/hr relative to the highway. It then climbs a hill whose crest is 50m above the level highway and parks at a rest area located there

What is the difference among cement plaster : If the tangents intersect at an angle of 40 degrees, what is the highest degree of curve that can be used?..how to solve this problem using chord basis formula?

Determine the volume of each cfstr : Disinfection by ozone follows first-order kinetics, with a rate constant of 1.2/minute. The town of Obfisquitory wishes to use 4 equal volumes of CFSTR's in series to disinfect 2 million gallons per day (mgd) of water containing 1000 coliforms/L to t..

What is the maximum length of trench that can excavated by : What is the maximum length of trench that can excavated by hand economically rather than by a trenching machine. it cost 900.00 to transport a trenching machine to the job and back to the storage yard. the trenching machine can excavate 265 linear fe..

Determine the design compressive strength for a pinned ended : Determine the design compressive strength for a pinned ended HSS 8x8x3/8 column of ASTM A500, grade B steel with an unbraced length of 35ft?

User Account

All Pages