Determine internal shear and moment at specified location

Assignment Help Civil Engineering
Reference no: EM13314270

Consider the general problem of the beam subjected to n concentrated loads. Write a computer program that can be used to determine the internal shear and moment at any specified location x along the beam, and plot the shear and moment diagrams for the beam. Show an application of the program using the values P1 = 500 lb, d1 = 5ft, P2 = 800 lb, d2 = 15ft, L1= 10ft, L = 15ft.

Reference no: EM13314270

Questions Cloud

Determine how much time does this maneuver take : a gymnast is performing a floor routine. In a tumbling run she spins through the air, How much time does this maneuver take
Determine the time needed to reach an acceleration : A car moves around a curved path that has a radius of 375 feet. While moving around the arced path, the car increases speed by 1.15 ft/s^2. If the car starts from rest, determine the time needed to reach an acceleration of 5.5 ft/s^2.
Define the equation for the reaction is- hcl+naoh nacl + h2o : A 10.0 mL sample of aqueous HCl requires 28.5 mL of 0.12 M NaOH to reach the endpoint. What is the molar concentration of HCl? The equation for the reaction is: HCl+NaOH NaCl + H2O
Find the number of moles of gas : Suppose the temperature of 4.67 L of ideal gas drops from 354 K to 275 K. Find the number of moles of gas
Determine internal shear and moment at specified location : Write a computer program that can be used to determine the internal shear and moment at any specified location x along the beam, and plot the shear and moment diagrams for the beam.
Explain yield for dehydration of 6.0 ml of cyclohexanol : Theoretical yield for dehydration of 6.0 mL of cyclohexanol. this information was given cyclohexanol Molar Mass 100.16(g/mol) d 0.948 (g/mL) Cyclohexene Molar Mass 82.15 (g/mol) d0.811 (g/mL)
Find what is the minimum radius of curvature for a curve : The coefficient of friction between a car's tires and the road is such that the car can generate a maximum deceleration of 1.1g without experiencing slip.
Find the total internal energy of the system : A cylinder contains 2.15 mol of helium gas at 22.5°C. Assume that the helium behaves like an ideal gas. Find the total internal energy of the system
What would be the reading on a barometer containing benzene : What would be the reading on a barometer containing Benzene at 20 degrees Celsius at a time when the atmospheric pressure was equivalent to 12.3 m of water

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the magnitudes of the components faa and fbb

Force F with magnitude indicated acts at point o. determine the magnitudes of the components Faa and Fbb along directions a-a and b-b so that F=Faa+Fbb

  Determine the water ph for a contact time of 90 minutes

In Chlorine disinfection (3-log reduction in Giardia- Cysts), determine the water pH for a contact time of 90 minutes using a chlorine concentration of 2 mg/L at 20 degrees C

  Determine what is the radial-horizontal stress at the point

A tire carries a 5,000-lb load and has a pressure of 100 psi. The pavement has a modulus of elasticity of 43,500 psi. A deflection of 0.016 inches is observed at a point on the pavement surface 0.8 inches away from the tire load.

  How close will missile get to the spaceship before stopping

The potential energy function of the missile, once it enters the force field, is given by U(x)= 2640(x-76.3)^2 + 1350. what is the force of the force field at x= 40.2 m. How close will the missile get to the spaceship before stopping

  Estimate the chronic daily intake of trichloro ethane

Estimate the chronic daily intake of 1,1,1-trichloro ethane from exposure to a city water supply that contains a 1,1,1-trichloroethane concentration equal to the drinking water standard of 0.2 mg/L.

  Determine what is the total resistance of the loads

You have 4 resistors (loads) in parallel. What is the total resistance of those loads The loads are as follows 4ohms, 6ohms, 16ohms and 1 ohms. When calculating 1/R, round to the fourth decimal point. Percentage of error margin is 0.5

  Explain about how big is the hole in the water pipe

A water main springs a leak and the geyser is estimated to be 20 feet in height. It is also estimated that about 300 gallons per minute is leaking based on flow into gutter. About how big is the hole in the water pipe

  What does line of collimation means

How to detect eror in line of collimation and what does line of collimation means.

  Which communitys transportation is more sustainable

Imagine two small towns of 1,000 people: Blacktop and Parktown. In the urban sprawl that is Blacktop, all the residents own fuel-efficient cars (15 km/liter) and travel an average of 20,000 km per year.

  Determine what is the magnitude and direction of the force

what is the magnitude and direction of the force of the water n the nozzle, if the nozzle is held steady/2- what is the FORCE if the fire fighter is running towards the fire, with the hose at a velocity of 1.5 m/s

  How will alum floc described in part d need to enter basin

A water treatment plant with a maximum daily flow of 4.4 m3/s is treating surface water with a minimum ambient temperature of -1°C (30°F). The water is coagulated with alum and the alum floc was measured to have a settling velocity of 1.6 m/h at 1..

  Give reason why plumbing should be considered by management

A chemical plant produces a process wastewater that contains a relatively high concentration of a small number of nontoxic organic compounds, but very low concentrations of solids or salts. It has no odor.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd