Determine if driver can clear the intersection safely

Assignment Help Civil Engineering
Reference no: EM13305220

The driver in problem 2 stops at an intersection with a two-way stop sign. Assume that the width of the intersection in 24 ft and the car is 20 ft long. If the driver's perception-reaction time is 0.75 seconds, determine if he can clear the intersection safely for the following conditions? (a) When the through traffic is quite heavy and the average gap between vehicles is 5 seconds. (b) If the average gap between vehicles increases to 10 seconds.

Reference no: EM13305220

Questions Cloud

Conduct an analysis on selected organisation : Overview of the organisation and the industry with its structure, products, and major business processes. Use a flowcharting diagram for each area as a supplement to your descriptions.
What is the current delivered by the generator : A stream turbine at an electric power plant delivers 4 500 kW of power to an electrical generator which converts 95% of this mechanical energy into electrical energy
Determine the flow of vehicles on the level section : From an aerial photograph, one observes that on a level section of a (multilane) highway, 25% of the vehicles are trucks, 75% are cars, and there are 50 vehicles per mile of highway. The trucks travel at 40 mph and the cars at 60 mph.
Customers owed the company $22,000 at year-end : 1. Customers owed the company $22,000 at year-end.
Determine if driver can clear the intersection safely : Assume that the width of the intersection in 24 ft and the car is 20 ft long. If the driver's perception-reaction time is 0.75 seconds, determine if he can clear the intersection safely for the following conditions
How many electrons hit the screen in given time : The current in an electron beam in a cathode-ray tube is measured to be 70 uA. How many electrons hit the screen in 5.0s
What is the net income annually for the plant : Due to efficiency, this was reduced 10%. The depreciation of the plant is 50,000 per year. Assuming a corporate tax rate of 40%, what is the net income annually for the plant?
Explain the managerial significance of the accounting : Assume the marina operator is unsophisticated in business. Explain the managerial significance of the accounting above to this person.
What is the total delay and the maximum queue length : Vehicles arrive at a freeway on-ramp meter at a constant rate of six per minute starting at 6:00A.M. Service begins at 6:00A.M. such that u(t)=2+0.5t, where u(t) is in veh/min and t is in minutes after 6:00A.M.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Estimate extent of laminar boundary layer flow along wing

An airplane flies at a speed of 360 mph at an altitude of 5000 ft. If the boundary layers on the wing surfaces behave as those on a flat plate, estimate the extent of laminar boundary layer flow along the wing in feet.

  Find the force exerted by the jet on the vane

A pipeline terminates in a nozzle of outlet diameter = 0.15 m. The free jet from the nozzle is deflected through 120º by a vane as shown. Water flow rate through this pipe is 0.25 m3/s. Ignoring friction, find the force exerted by the jet on ..

  Operational changes to prevent river from contamination

assuming that the contaminant travels mainly by advection, propose any operational changes to the given layout to prevent the river from being contaminated.

  Calculate equivalent pipe size and flow in the pipe

The first pipe of 0.4-m diameter is 500 m long, the second pipe 600 m long, size 0.3 m, and the last pipe is 500 m long of diameter 0.2 m. If the elevation difference between two reservoirs is 30 m, calculate equivalent pipe size and flow in the p..

  Calculate enthalpy that has been added by burning fuel

Exhaust gas from a chemical process flows at a rate of 8,000 actual cubic feet per minute (acfm) from point A at 250°F and 1 atm pressure. It flows through a circular duct to a fan

  Find the increase in vertical stresses due to the weight

The center to center spacing to the two tanks is 14 m. The new tank imparts 150 kPa at the ground surface. Find the increase in vertical stresses due to the weight of the two tanks mid- way between the two tanks at the center of the clay layer.

  Determine what external force is required to hold the bend

A pipe 1ft in diameter bends through an angle of 135 degrees. The velocity of flow of gasoline ( S = 0.8) is 20ft/s and the pressure is 10psig in the bend. What external force is required to hold the bend against the action of the gasoline

  What is max mole fraction of methanol that can be achieved

A solution containing 30% methanol (by mol) is flashed to 1 bar, 70.82°C. Determine the phase of the system; if 2 phases, report the compositions and relative amounts of each phase.

  Describe what is the maximum acceptable internal pressure

of 2640 psi with a factor of safety of 2.0 with respect to yielding. the yield stress of the steel is 65,000 psi in tension and 32,000 psi in shear. the diameter of the tank is 7.0 in. the minimum required wall thickness is 0.289 in.

  Determine the height h

Determine the height "h" on the wall to which the firefighter can project water from the hose...and the speed of the water at the nozzle is v= 55ft/s. The firefighter is holding the hose 3.5 ft from the ground and the wall is located 15ft from the..

  Determining height for trajectory motion

The elastic ball bounces down a flight of rigid stairs. Determine the height h of the steps if all the trajectories between successive steps are identical. Use e = 0.85 and the initial velocity 6 m/s.neglect friction. (Theta=70 degrees)

  What is the concentration of tracer in the reactor

What is the concentration of tracer in the reactor 1 h after tracer addition is terminated? The reactor had an initial concentration of tracer of 1.0 mg/L when tracer addition commenced.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd