Determine highest bodu concentration possible in effluent

Assignment Help Civil Engineering
Reference no: EM13309190

A wastewater treatment operator has been fined because the DO at a point 6 km downstream is below the permit limit of 5 mg/L. Determine the highest BODu concentration possible in the effluent which can still achieve the permitted requirement of a DO greater than 5 mg/L year round.


QR = 13.8 m3/s

QW = 4.4 m3/s

TW Summer = 30°C

TR Summer = 22°C

TW Winter = 13°C

TR Winter = 7°C

kBOD@20° = 0.4 d-1 (assume KBOD is the same for the river and effluent)

H =4 m (assume no change due to wastewater flow)

V = 0.03 m/s (assume no change due to wastewater flow)

DOR = 7 mg/L

DOW = 1 mg/L

BODR = 5 mg/L

n = 0.4

Reference no: EM13309190

Questions Cloud

Find over the entire trip the work done by the air forces : A 5.0-kg projectile is fired over level ground with a velocity of 200.0 m/s at an angle of 30.0 ° above the horizontal
Design a curve for highway by stationing of the pc and pt : A horizontal curve is being designed for a new two-lane highway(12-ft lanes). The PI is at station 250 + 50, the design speed is 65 mi/h, and a maximum superelevation of 0.07 ft/ft is to be used.
Determine the potential energy stored in the spring : A force of 20 N holds an ideal spring with a 1-N/m spring constant in compression. The potential energy stored in the spring is
Wat is the magnitude of the buckets acceleration at instant : Jose is swinging a small bucket of water by a rope over his head at a constant angular speed of dot=10rad/s. The rope is Length L=1m and the combined mass of the bucket and water is 4kg.
Determine highest bodu concentration possible in effluent : Determine the highest BODu concentration possible in the effluent which can still achieve the permitted requirement of a DO greater than 5 mg/L year round.H =4 m (assume no change due to wastewater flow)
Case study harley-davidson : When Harley-Davidson implements RFID, it will likely use the technology to help manage its relationships with its main customers, which are the local dealerships that sell motorcycles and use replacement parts in their shops.
Summarize the segmentation and targeting strategy : In a small group, visit a grocery store and examine the brands of breakfast cereal. Using the bases for segmenting consumer markets, identify the segmentation variables a specific brand appears to be using. Summarize the segmentation and targeting st..
What is the current through this wire : A copper wire has a total lenght of 28m. Half of the wire has a cross-sectional area of 6 mm^2, what is the current through this wire
Find concentration of salt in stream after discharge point : Assume that the sewer flow and the stream flow are completely mixed, that the salt is a conservative substance (it does not react), and that the system is at steady state.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the angular displacement for the pulley d

The cylinder B is released from rest. Determine the speed of both masses (vA and vB) after B moves by h m. Also calculate the angular displacement for the pulley D. The diameter of the pulley D is 0.2 m. Neglect all friction.

  Tackling the problem of making tunnel

You are a Project Manager on site where work for 3K.m. long Tunnel has been undertaken. The site is remote and takes about 2 days travel to nearest town. Supervisors, Technicians & Skilled Workers are engaged in dangerous / hazardous work.

  Calculate the ratio of the area to volume for unit cube

calculate the ratio of the area to volume for unit cube,a unit sphare inscribed inside the cube,and as right cylinder inscribed inside the cube.

  Determine the storage content at the end of 30 days

During a particular 30-day period, the streamflow flowing into a reservoir averaged 5.0 m3/s. Water supply withdrawals from the reservoir averaged 136 mgd. The only other outflow from the reservoir was 9.4 cm of evaporation from the water surface.

  Determine the required value for m

A 1 meter diameter cylindrical mass, M, is connected to a 2 meter wide rectangular gate. The gate is to open when the water level, h, drops below 2.5 meters. Determine the required value for M. Neglect friction at the gate hinge and pulley.

  Write program that outputs the tuition of four universities

study the sources for current tuition rates and historical trends of tuition. assume that in the next 20 years tuition will change with a similar trend for all universities .

  Resultant force from all fluids

A tank is filled with oil (specific gravity 0.8) and water to a depth of 10 meter and 6 meter respectively. Find the resultant force from all fluids acting on the gate of 1.8 meter by 9 meter.

  How to sketch the hgl and the egl for the system

What power must the pump supply to the system to pump the oil from the lower reservoir to the upper reservoir at a rate of .2 m^3/s. Sketch the HGL and the EGL for the system.

  What are the tensions in cables ab and ad

The 20-kg mass is suspended from three cables. Cable AC is equipped with a turnbuckle so that its tension can be adjusted and a strain gauge that allows its tension to be measured. If the tension in cable AC is 40 N, what are the tensions in cable..

  Find the effective rate of return per quarter to purchaser

A $10,000 bond that matures in 20 years with interest at 8% per year payable quarterly was issued 4 years ago. If the bond is purchased now for $10,000 and held to maturity, what will be the effective rate of return per quarter to the purchaser

  Determine direction of ground water flow through triangle

The depth to water in A is 210 ft, in B is300 ft, and C is 230 ft. Determine the direction of ground water flow through the triangle ABC and calculate the hydraulic gradient. If the aquifer hydraulic conductivity is 30 ft/day, estimate how far gro..

  Find elevation difference in siphon crown nd downstream pool

The siphon crown is 1.2m above the water surface elevation of the reservoir and a length of 10m away from the siphon entrance. If the siphon diameter is 30 cm, the friction factor is 0.2, and the head loss coefficients are 0.2 inlet and 0.1 exit,

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd