Determine exergy destroyed and minimum work input process

Assignment Help Mechanical Engineering

Reference no: EM13707692

A well-insulated rigid tank contains 1 kg of air at 30°C. A paddle wheel rotates inside the tank and increases the temperature of the air to 60°C. If the environment is at 100 kPa and 25°C, determine the exergy destroyed and the minimum work input for this process.

Reference no: EM13707692

Questions Cloud

Compute the final energy of the system : A 15.0 µF capacitor is charged to a potential difference of 900V. The terminals of the charged capacitor are then connected to those of an unchanged 12.0 µF capacitor. Compute the final energy of the system

Steam enters an adiabatic turbine steadily : Steam enters an adiabatic turbine steadily at 4.5 MPa and 450°C at a rate of 10 kg/s and exits at 450 kPa and 150°C. If the environment is at 100 kPa and 25°C, calculate the exergy of the steam at the inlet and the exit conditions.

Find what mass of honey flows out of the straw : A plastic straw 20.0 cm long and 3.00 mm in diameter is filled with honey. What mass of honey flows out of the straw in 1.0 s

Determine exergy destroyed and minimum work input process : A well-insulated rigid tank contains 1 kg of air at 30°C. A paddle wheel rotates inside the tank and increases the temperature of the air to 60°C. If the environment is at 100 kPa and 25°C, determine the exergy destroyed and the minimum work input fo..

What is its charge density : The Earth may be modeled as a conducting sphere. Assuming that the magnitude of the electric field at the Earth's surface is 150 V/m, What is its charge density in units of e/cm2

What is the dissipated power : A typical light bulb in your house is rated 117.6 W, which means that the lightbulb dissipates 117.6 W when connected to a DC voltage of 110V. what is the dissipated power

Determine the change in flow exergy of the refrigerant : 0.75 kg of Refrigerant 134-a is compressed in a compressor from 160 kPa and -10°C to 1.2 Mpa and 50°C, steadily. Determine the change in flow exergy of the refrigerant during this process, if the environment is at 100 kPa and 25°C.

Find what is the electric flux through this cubical surface : A uniform charge density of 680 nC/m3 is distributed throughout a spherical volume of radius 6.00 cm. What is the electric flux through this cubical surface if its edge length is 3.30 cm

User Account

All Pages