Determine efficiency of transformer for secondary current

Assignment Help Electrical Engineering
Reference no: EM13256327

A single-phase, 100-kVA, 1000:100-V, 60-Hz transformer has the following test results:

Open-circuit test (FIV side open): 100 V, 6 A, 400 W

Short-circuit test (LV side shorted): 50 V, 100 A, 1800 W

1)Determine the voltage regulation at 75% of the rated secondary current with 0.6 power factor leading. Assume the primary is supplied with rated voltage.

2)Determine the efficiency of the transformer when the secondary current is at its rated value and the power factor at the load is 0.8 lagging with a secondary voltage of 98 V across the load.

Reference no: EM13256327

Questions Cloud

What are the portfolio weights for a portfolio : What are the portfolio weights for a portfolio that has 132 shares of Stock A that sell for $42 per share and 112 shares of Stock B that sell for $32 per share? (Round your answers to 4 decimal places. (e.g., 32.1616))
Write a program to generate a 25-hz digital waveform : Write a program to generate a 25-Hz digital waveform with a 50 percent duty cycle on the PT0 pin as long as the voltage level on the PP7 pin is high. Your program should consist of two parts: Entry test. As long as the PP7 pin is low, it stays in t..
What is the magnetic induction due to a coil current : The uniform purely axial magnetic induction required by the experiment in a volume large enough to accommodate the Lorentz Tube is produced by the Helmholtz Coils. What is the magnetic induction due to a coil current 1.5 Ampere
What is the difference between these two types factors : what are some of the external and internal factors that affect a firm's stock price? What is the difference between these two types factors?
Determine efficiency of transformer for secondary current : A single-phase, 100-kVA, 1000:100-V, 60-Hz transformer has the following test results: Open-circuit test (FIV side open): 100 V, 6 A, 400 W Short-circuit test (LV side shorted): 50 V, 100 A, 1800 W 1)Determine the voltage regulation at 75% of the rat..
Describe some aspect of the earth in space : Write a paragraph essay describing some aspect of the earth in space. Attached is a reference for material. This needs to be using strict APA format.
Find magnitude of the emf induced in the secondary winding : A very long, straight solenoid with a cross-sectional area of 2.30cm2 is wound with 93.4turns of wire per centimeter. What is the magnitude of the emf induced in the secondary winding at the instant that the current in the solenoid is 3.2
What is the companys after-tax return on the preferred : Your corporation has a marginal tax rate of 35% and has purchased preferred stock in another company. The before-tax dividend yield on the preferred stock is 12%. What is the company's after-tax return on the preferred, assuming a 70% dividend exc..
What must be the distance be between filaments 2 and 3 : Filament 1 is on the left, filament 2 is in the middle, and filament 3 is on the right. Filaments 1 and 2 have currents of 1 A in the ba z direction, and filament 3 has a current of 2 A in the ba z direction

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Convert the temperature range into an 8-bit digital word

Devise a system that will convert this temperature range into an 8-bit digital word with conversion from 00H to 01H at 200°C and from FEH to FFH at 350°C . An ADC is available with a 2.500-V internal reference. At 200°C a type K TC produces 8.13 m..

  Find the minimum sum-of-products form for f

(a) Find the maxterm expression for F. Express your answer both in decimal and algebraic form. (b) Use a Karnaugh map to find the minimum sum-of-products form for F'. (c) Find the minimum product-of-sums for F.

  Design a second-order band-pass iir filter with centre freq

Design a second-order band-pass IIR filter with center frequency of 450 Hz when the sampling frequency is 2,000 Hz. In order to ensure the filter stability, set the poles at 0.96 radial distant from the origin

  Etermine the equivalent abcd parameters for the line

a positive-sequence shunt admittance y= j4.4* 10-6 S/km. for this line if it has 70% shunt reactive (inductors) compensation and 40% series capacitive compensation. Half of this compensation is installed at each end of the line.

  Create correct number of instances of a one-bit full adder

Create a Verilog module that implements 4 bit full adder-subtractor with overflow detection. You may use Verilog bitwise operators and gate primitives, but no mathematical operators or behavioral Verilog syntax.

  What fraction of the widths of the strip should be added

A 78oham lossless planar line was designed but did not meet a requirement. What fraction of the widths of the strip should be added or removed to get the characteristic impedance of 75oham

  Develop an expression for the time to drain the tank

The stepped cylindrical tank is initially filled with liquid water at STP to a height H1. Subsequently, a plug at the bottom of the tank is removed to allow water to flow from the small hole of diameter d. The velocity v of the flowing water

  Explain zener diode and series resistance

Zener Diode and Series Resistance, In the zener diode circuit calculate the value of the current through the zener diode if the power supply is rated 24 volts at 500 milli amperes

  Determine the transfer function for band pass filter

Determine the transfer function for a second order band pass filter with specifications. Chebyschev type with 1 db ripple in the pass band Lower cutoff frequency = 100 radians/sec Upper cutoff frequency = 169 radians/sec Pass band gain = 1

  What is the real power-reactive power and aparent power

A manufacturing plant has a 600V, 60Hz supply and the following loads: Lights: 24kW Electric furnace: 4.8 + j6.4%u03A9 with a current of 150A Motor loads, 160kW at 0.8 Power Factor, lagging.

  Find the real power absorbed by each of the impedances

he real power delivered by a source to two impedances, Z1=3+j4 ohm and Z2=10 ohm, connected in parallel, is 1100 W. Determine (a) the real power absorbed by each of the impedances and (b) the source current.

  How many joules of energy are stored in the battery

A double-A (AA) rechargeable battery is rated at 1.2V, 2100mAh (mili-amp hours) 1- how many coulombs of charge can this battery hold 2- how many joules of energy are stored in the battery

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd