Determine effective annual interest rate for a nominal rate

Assignment Help Civil Engineering
Reference no: EM13302549

Determine the effective annual interest rate for a nominal rate of 8% per year, in which is compounded quarterly.

Reference no: EM13302549

Questions Cloud

How many ads of each type should be placed : How many ads of each type should be placed?
Determine what is the permeability of the soil : The Permeability of a semi-impervious soil was evaluated in a falling-head permeameter whose head decreased from 40 to 15 inches in 5min. The body diameter was 0.1 inch, and the sample length and diameter was 2 inches.
What will be the company return on equity : Management projects an EBIT of 1,000,000 on sales of 10,000,000 and it expects to have a total assets turnover ratio of 2.0, under these conditions, the tax rate will be 34%. If the changes are made, what will be the company's return on equity?
Determine the value of the dynamic viscosity at conditions : Start from the values for the density and the kinematic viscosity of CO2 at 15o C and standard atmospheric pressure (101.3 kPa), and first determine the value of the dynamic viscosity at the same conditions.
Determine effective annual interest rate for a nominal rate : Determine the effective annual interest rate for a nominal rate of 8% per year, in which is compounded quarterly.
What is its linear speed at the bottom of the incline : A spherical object with a moment of inertia of 0.482mr2 starts from rest rolling down a 3.14-m high incline. what is its linear speed at the bottom of the incline
Determine a dollar amount on december 31st-2011 : determine a dollar amount on December 31st , 2011 FOR $1000 equal payments made at the end of each of the previous 7 years including the current year. use an effective interest rate of 10% compounded annually.
The internet for direct customer feedback and new product id : In which of the following types of firms is the product manager MOST likely to rely on the Internet for direct customer feedback and new product ideas?
If the bar is reloaded then what is the proportional limit : A circular bar of magnesiuen alloy is 750 mm long. The bar is loaded in tension to an elongation of 6.0 mm, and the load is removed. (a) what is the permanent set of the bar (b) if the bar is reloaded, what is the proportional limit

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine pressure drop in length assuming laminar flow

Under these conditions flow is expected to be turbulent, but for a clean air, very smooth enterance (with guided vanes) to the tube and no tube vibration, it may be possible to maintain laminar flow.

  Determine the flow area

A rectangular concrete channel is 3 m wide and 2 m high. The water 20 deg Celsius in the main channel is 1.5 m deep and is flowing at a rate of 30 m^3/s. determine the flow area, wetted perimeter, and hydraulic radius. is the flow laminar or turbu..

  Determine the amount of moisture removed from the air

Moist air at standard conditions is at a dry bulb temperature of 80 degree F and a relative humidity of 50%. It is cooled to 50 degree F. Use the psychromtric chart to determine: a- The energy removed from the air after it is cooled in BTU/lb of d..

  Calculate q-w change in u and h for each processes

Cooling at constant pressure followed by heating at constant volume. Calculate Q, W, change in U, and change in H for each of these processes, and sketch the paths of all processes on a single PV diagram.

  Determine the maximum negative moment in each span

determine the maximum negative moment in each span and maximum negative moment at each support. remember that live loads shall be placed so as to cause the greatest effect. specify the method that you used to determine the moments.

  Determine the angular acceleration of the spool

determine the angular acceleration of the spool and the acceleration of the trailer. The wheels have negligible mass and are free to rotate.

  Oxidization of ammonia during nitirification

what is the final dissolved oxygen concentration (in mg/L) in the waste lagoon after all of the ammonium (NH4 + ) is converted to nitrate? Recall that 4.57 mg of O 2 is need per mg of ammonium (as N) oxidized during nitirification. After all of the..

  Seepage velocity and estimating hydraulic gradient

The dye appears 14 days later in an observation well 75 ft away from the injection point. Compute the seepage velocity and estimate the hydraulic gradient in the aquifer if the porosity of the soil is 42%.

  Explain what criteria are used in the selection of personnel

What criteria are used in the selection of personnel for the demonstration of maintenance tasks? Define the criteria for the selection of test and support equipment.

  Presedimentation-uspended solids concentration of raw revers

Presedimentation can reduce the suspended solids concentration of raw river water from 500 mg/L to 200 mg/L. How many pounds of dry solids does this represent per million gallons?

  Determine bulk density and the degree of saturation

A cylindrical sample of soil 39 mm in diameter and 77 mm long weighed 180 g. The sample is not fully saturated and its moisture content was found to be 27.0%. Assume rS = 2.70 Mg/m3. Determine: a. the bulk density, r b. the dry density, rd c. the d..

  Determine the change in length of the steel bar

A steel bar of length 30 inches and circular cross section whose diameter varies linearly from 0.50 inches at one end to 0.75 inches at the other is subjected to an axial tensile force of 4.5 kip. Find the change in length of the bar.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd