Determine critical load if bottom and top are both pinned

Assignment Help Mechanical Engineering

Reference no: EM13718477

1) A 12 foot, A-36 steel, column has an outer diameter of 3.0 in and a thickness of 0.25 in. Determine the critical load if the bottom and top are both pinned.

2) A 10 meter wooden column has a square cross section of 50mm x 50mm. Determine the critical load if the bottom is fixed and the top is pinned. (E=13 GPa, ?y = 40MPa)

Reference no: EM13718477

Questions Cloud

Determine the forces exerted on the bearings at a speed : The rotor of a turbine 13.6kg in mass is supported at the mid span of a shaft with bearings 0.4064m apart. The rotor is known to have an unbalance of 0.5kgcm. Determine the forces exerted on the bearings at a speed of 5000rpm if the diameter of the s..

Use the thin-airfoil theory to find the center of pressure : Use the thin-airfoil theory to find the center of pressure (as a function of lift coefficient) and the moment coefficient about the aerodynamic center for the NACA 2412 and the NACA 4412?

Applying energy and entropy rate balances evaluate the claim : A heat pump operates at steady state maintains a house at 22 0C when the outside is -22 0C using 15 kW of power. The manufacturer claims that the power input required is 3.2 kW. Applying energy and entropy rate balances evaluate the claim.

The amount of exergy destroyed and change in exergy of air : A rigid insulated tank contains 0.6 kg of air, initially at 200 kPa, 20 C. The air is stirred by a paddle wheel until its pressure is 250 kPa. Using the ideal gas model with Cv = 0.72 kJ/(kg*K), determine, in kJ, (a) the work, (b) the change in exerg..

Determine critical load if bottom and top are both pinned : A 12 foot, A-36 steel, column has an outer diameter of 3.0 in and a thickness of 0.25 in. Determine the critical load if the bottom and top are both pinned. A 10 meter wooden column has a square cross section of 50mm x 50mm. Determine the critical lo..

One cubic meter of argon initially : One cubic meter of argon initially at 300 K is compressed such that the change in the specific enthalpy is -0.27 kJ/kg-K and the temperature is reduced 100 K. Determine the final volume of the argon. (k = 1.67)

Power required to operate this air-conditioning system : An air-conditioning system operating on the reversed Carnot cycle is required to transfer heat from a house at a rate of 727 kJ/min to maintain its temperature at 21°C. If the outdoor air temperature is 39°C, determine the power required to operate t..

Due to global climate change scientist predict : Due to global climate change scientist predict the earth’s atmospheric temperature will increase as much as 8°F in the next 100 years. Estimate the overall energy increase [kJ] in the atmosphere this temperature rise will cause. Consider the thicknes..

What is the effectiveness of the heat exchanger : A concentric tube, i.e. tube-in-tube, heat exchanger uses water at 15 °C to cool ethylene glycol from 100 °C to 60 °C. The water and glycol flow rates are each 0.5 kg/s. The specific heat of glycol and water are 2637 J/kg-K and 4180 J/kg-K, respectiv..

User Account

All Pages