Determine annual volume of solid waste produce by source

Assignment Help Civil Engineering
Reference no: EM13307015

1) the bailey stone works employs six people. assumming that the density of uncompacted waste is 480 kg/m^3, determine the annual volume of solid waste produce by the stone works assumming a waste generation rate of 1 kg/cap*d.

2) as the supply of high- grade ores is used up, lower grade ores are used to produce minerals. assumming that you are producing 100 kg of metal, use the mass balance method to calculate the kilograms of waste rock per kilogram of metal for ore containing 50, 25, 10, 5 and 2.4 percent metal.

Reference no: EM13307015

Questions Cloud

Calculate the heat transfer per unit mass during expansion : Calculate the heat transfer per unit mass during the expansion if the exit temperature is 50 degrees celcius.
What is the isentropic efficiency of the compressor : An adiabatic argon unit compresses argon at 200 kPa and 27C to 2.18 MPa. If the Argon leaves this compressor at 513C. What is the isentropic efficiency of the compressor
Accelerates at a constant rate until he passes station b : A express train travels along a straight line between two stations, A and D. Stations B and C are spaced evenly along the line between A and D. The engineer leaves A and accelerates at a constant rate until he passes station B
Explain is the web is changing users collectively : Is the Web (and Web multimedia) is changing users collectively or individually in profound or superficial ways. Can we see new cultural values being shaped or sub-cultures being formed which may permanently affect our cultural values.
Determine annual volume of solid waste produce by source : the bailey stone works employs six people. assumming that the density of uncompacted waste is 480 kg/m^3, determine the annual volume of solid waste produce by the stone works assumming a waste generation rate of 1 kg/cap*d.
How far did the object travel : The velocity vs time graph of an object is approximated by a triangle which starts at v=0 at t=0, rises to a maximum of v=6 m/s at t=6 sec, then returns to zero at t=10 sec. How far did the object travel?
What would be a safe horizontal seperation for the fly : Archer fish often prey for flies that hover above the water. The index of refraction of water is 1.33. what would be a "safe" horizontal seperation for the fly
Find the acceleration of a forklift of mass : Find the acceleration of a forklift of mass 1400 kg pushed by a force of 2100 N that is opposed by a frictional force of 425 N.
Find the deepest value in a binary tree in c++ : How do you find the deepest value in a binary tree in C++?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine is the flow rate typical for a bathroom faucet

Water in a household plumbing system originates at the neighborhood water main where the pressure is 480kPa, the velocity is 5m/s, and the elevation is 2.44 m. A 19 mm (3/4-in) copper service line supplies water to a two-story residence

  Determine the work done in the compression process

Methane is compressed in a piston-cylinder device from initial pressure of 110 kPa and an initial temperature of 25 oC to a final pressure of 1,00 MPa. The compression process is polytropic with n = 1 .10.

  Compute the maximum acceptable service load

Compute the maximum acceptable service load on an A36 steel plate tension member 1/4in.x12in. having a single line of holes parallel to the direction of loading. The load is 25% dead load and 75% live load, and 7/8in. diameter bolts are used.

  Determine the minimum thickness of the welds

The tank has an inside diamater of 100 cm and will be subjected to a maximum internal pressure of 820 kPa. The allowable tensile stress in the wall is 83 MPa, and the allowable tensile stress in the weld is 55 MPa.

  Determine the horizontal spacing of the vertical drain

determine the horizontal spacing of the vertical drains if the drains are installed in triangular grid to reach 90% of primary consolidation in 1.5 years after the commencement of fill placement

  What is probability that the wave height will exceed 6 meter

A nuclear facility in a coastal region is built to withstand ocean wave forces. Suppose the annual maximum wave height of the ocean waves (above the sea level) is a lognormal random variable with mean height of 4.0 meters and a c.o.v. of 0.8

  Determine the volume and mass of the liquid

A cylinder contains 3 kg of water and water vapor mixture in equilibrium at a pressure of 500 kN/m2. If the volume of the cylinder is 1.0 m3, calculate the following: a) Temperature of the mixture b) The volume and mass of the liquid

  What is the average degree of consolidation for clay layer

A normally consolidated clay layer is 4 m thick (one way drainage). From the application of a given pressure, the total anticipated primary consolidation settlement will be 80mm. What is the average degree of consolidation for the clay layer.

  What is the annual power cost of the ro system

Is the system within membrane manufacturer's warranty requirement of maximum flux rate of 14 gfd? What is the annual power cost of the RO system?

  Percent by weight of limestone

A slurry containing 20 percent by weight of limestone (CaCO 3 ) is processes to separate pure dry limestone from water. If feed rate is 2000kg/h, how much CaCO 3 is produced per hour?

  What is the maximum safe speed around the curve

What is the maximum safe speed around the curve? If the speed limit on the roadway is 60mph, what action should be taken by the engineer?

  What is the corresponding horizontal distance

A runs slope a distance of 156.777 m from one point to another point at a rate of +1.5%. What is the corresponding horizontal distance between the points?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd