Determine amount of coal used per day if heat of combustion

Assignment Help Civil Engineering
Reference no: EM13310489

A coal fired power plant can be modeled as a heat engine. If the power output of the plant is 200 MW and the thermal efficiency is 42%, determine the amount of coal used per day if the heat of combustion from the coal is 24,000 kJ/kg.

Reference no: EM13310489

Questions Cloud

Determine the required source temperature of heat sink : A Carnot heat engine is supplied with a high temperature heat source at a rate of 200 kW. If the power output of the heat engine is 120 kW, determine the required source temperature if the heat sink temperature is 20 °C.
Explain the homo and which is the lumo in the excited state : Which MO is the HOMO and which is the LUMO in the excited state 5. How many nodes does the highest-energy molecular orbital of 1,3,5,7-octatetraene have between the nuclei
Use a single blank line to separate code blocks : Do not identify yourself in your source code file. The system will maintain your identity and keep the process of reviewing anonymous. Upload the this file using the Submission Facility below, then proceed to completing reviews.
Demonstrate six sigma proficiency : Demonstrate Six Sigma proficiency
Determine amount of coal used per day if heat of combustion : A coal fired power plant can be modeled as a heat engine. If the power output of the plant is 200 MW and the thermal efficiency is 42%, determine the amount of coal used per day if the heat of combustion from the coal is 24,000 kJ/kg.
How to calculate the work done by the gas : Calculate the work done by the gas if it expands against a constant pressure of 5 atm. -Answer is -1.14x10^4 J but just need to know how to get there.
Calculate the decay rate of radon in units of hr-1 : Indoor Air quality is greatly affected by Radon, which can cause lung cancer. When we moved to Colorado, we tested the house for Radon and installed a radon mitigation system.
Explain what is the final concentration of cl2 in the flask : We place 1.32 mol PCl5 in a 1.0 L flask and allow it to reach equilibrium at a given temperature. What is the final concentration of Cl2 in the flask
Design a wireless network for your home network : Define the termcomputer-based information systems. In your definition, discuss three types of information systems, the audience or level of management served by each, and how the systems benefit the organization.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What will be gage reading if atmospheric pressure increases

a bourdon pressure gauge attached to the outside of a tank containing air reads 77.0 psi when the local atmospheric pressure is 760 mm Hg. what will be the gage reading if the atmospheric pressure increases to 773 mm Hg

  Compute unit weight under conditions when sand is dry

A sand with Gs=2.66 and e=0.60 is completely dry. It then becomes wetted by a rising groundwater table. Compute the unit weight under the following conditions: a.) when the sand is completely dry

  Elevation and stationing of the low point

A 1600 ft long sag verical curve (equal tangent) has a pvc at station 1200+00 and elevation o 1500 ft. the initial grade is -3.5% and the final grade is 6.5%. determine the elevation and stationing of the low point, pvi and pvt.

  Define coil spring which has been compressed

Question about Spring, A 37kg object is placed onto a coil spring which has been compressed 43mm. The force used to compress the spring was 35KN.

  Calculate the initial head loss through a dual-media filter

The porosity of both media is 0.40, the shape factor for the anthracite is 7.5, and the shape factor for the sand is 6.0. Assume a water temperature of 60 F.

  Net rate of flow of linear momentum via control surface

Measurements indicate that to cause this flow the force acting on the contents of the control volume is 40i lb. Determine the net rate of flow of linear momentum through the control surface.

  How far downstream would you establish barricades

The fire department proposes to approach the truck from the upstream side and heavily spray the truck with water to prevent an explosion. Will this help to reduce the chlorine concentration downstream?

  Explain how to plot the hydraulic grade line

Water is pumped from a reservoir whose surface elevation is 1390 ft to a second reservoir whose surface elevation is 1475 ft. The connecting pipeline is 4500 ft long and 12 in. in diameter.

  Find the optimal solution

The company would like to distribute the songs between the two CDs such that the used space on each CD is about the same. Formulate the problem as an IP, and find the optimal solution.

  Find the impac energy absorbed in breaking the specimens

A Riehle Impact Testing Machine was used to break the specemins and the reading gave 68ft/lb, 66ft/lb, 64ft/lb, 69ft/lb and 63ft/lb. The cross section dimensions of the Charpy were measured to be 0.320in and 0.397in.

  Force that cause stress-free

The rigid bar abcd is supported by a pin at B and restrained by identical steel bars at C and D, each of area 250mm 2 . if the temperature is increased by 8 0 C, find out the force P that will cause the bar at c to be stress-free.

  Determine max magnitude of pq that satisfies limit states

The beam is fully restrained at both ends but is unbraced along its span. Determine the maximum magnitude of PQ that satisfies the ultimate strength limit state for flexural strength

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd