Determine a maximum safe speed to the nearest 5 mph

Assignment Help Civil Engineering
Reference no: EM13310652

A horizontal curve on a two-lane highway (12-ft lanes) has PC at station 123+80 and PT at station 129+60. The central angle is 35 degrees, the super elevation is 0.08, and 20.6 is the cleared (for sight distance) from the inside edge of the innermost lane. Determine a maximum safe speed to the nearest 5 mph.

Reference no: EM13310652

Questions Cloud

What is the gauge pressure : A submarine dives to a depth of 310 feet in the ocean. What is the gauge pressure at this depth? How many atmospheres is this
Describe the leadership styles of john and shawn : How would you describe the leadership styles of John and Shawn?
Explain what design speed was used to design the curve : A freeway exit ramp has a single lane and consists entirely of a horizontal curve with a central angle of 90 degrees and a length of 628 ft. If the distance cleared from the centerline for sight distance is 19.4 ft
Discuss the costs involved in implementing the database : Using the SafeAssign link in Blackboard to submit your report. Download and print out the FULL report and attach to the appendix at the back of your report. Assignments without the full SafeAssign report will NOT be marked.
Determine a maximum safe speed to the nearest 5 mph : The central angle is 35 degrees, the super elevation is 0.08, and 20.6 is the cleared (for sight distance) from the inside edge of the innermost lane. Determine a maximum safe speed to the nearest 5 mph.
Determine if the drive way will be affected : A developer wants to provide access to a new building from a driveway placed 1000 ft upstream of a busy intersection. He is concerned that queues developing during the red phase of the signal at the intersection will block access.
Uncertainty and decreasing profitability : AirWays Global, a US commercial airline, is experiencing marketing problems three years after 9/11. While the industry as a whole is on the path to recovery, after three years of uncertainty and decreasing profitability
Compute required weight of coarse aggregate per cubic yard : A concrete mix with a 3 inch slump, w/c ratio of 0.50, and sand with a fineness modulus of 2.4 contains 1.700 lb/yd^3 of coarse aggregate. Compute the required weight of coarse aggregate per cubic yard.
Produce a fairly comprehensive product : The Technical Journal assignment for the Linux class is not a typical assignment and this document is certainly not a typical "template" to facilitate the assignment.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine aerodynamic drag on the full-scale prototyple car

The aerodynamic drag of a new sports car is to be predicted at a speed of 50mph at an air temperature of 25 degrees Celcius. Automotive engineers build a one-fifth scale model of the car to test in a wind tunnel.

  Calculate the specific volume and density at a pressure

Assuming steam to be an ideal gas, calculate its specific volume and density at a pressure of 90 lb/in^2 and a temperature of 650°F.

  Determine the velocity downstream of the rotor

An early NASA/DOE wind turbine consisted of a 125.0-ft diameter, two-bladed horizontal axis rotor. Maximum power was achieved at a wind speed of 19.0 miles/hr.

  Draw a schematic and show the control volume have selected

Refrigerant 22 is used in the evaporator pipe of a commercial refrigeration unit. At steady state it flows at a rate of 0.5 kg/s through the pipe of constant diameter. It enters the pipe at -­10C with a velocity of 5 m/s and a quality of 25%.

  Convert all quantities to si units then convert it to mph

Assume the plane is flying at an altitude of 32,810 ft (10 km), where the temperature is -8 C and the pressure is 250 mb. The Pitot-static tube measures a piezometric pressure difference corresponding to 1.206 psi. What is the airspeed in both m/s..

  Design the ramp for the highest design speed

Design the ramp for the highest design speed (to the nearest 5 mph) without exceeding a minimum D of 8.0. (Assume the PC of the horizontal curve is at station 15+00, and the vertical curve PVIs are at the PC and PT of the horizontal curve). Maximu..

  What are the factors affecting the hydraulic conductivity

what are the factors affecting the hydraulic conductivity?

  Determine what is the definition of critical state

what is the definition of critical state. explain at which stage a critical state may be approached in a drained triaxial text on a overconsolidated clay using stress path and strain-strain plot.

  What percent of the particles does the settling tank capture

The setting velocity of a particle is 0.002 m/s and the overflow rate of a settling tank is 0.008 m/s. (a) what percent of the particles does the settling tank capture. If the particles are flocculated so that thie rsettling rate is 0.05 m/s

  What is the total equivalent through volume on the approach

An intersection approach volume is 1,500 veh/h and includes 12% left turns with a through-vehicle equivalent of 2.3 tvu's/left turn. What is the total equivalent through volume on the approach

  Calculate critical crack length required to cause fracture

We know that the part has an intial crack of length 0.02 mm, and that the fracture toughness is 55 MPA(m)^1/2If the part is subject to cycle loading of 300 Mpa in tension and compression, calculate (assuming Y1.2, n = 3.4 and C = 2x10^-11 in units ..

  Determine how much sand did driver place in the drum

A truck driver used sand to soak up a 1 g spill of lindane (C6H6Cl6). He placed the contaminated soil in an open drum which then filled with 150 L of water during a rainstorm. You test the water and find a concentration of 17 M/L.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd