Determine a distance between cross-sections

Assignment Help Civil Engineering
Reference no: EM13310769

Route a trianglular hydrograph through a 100 foot wide rectangular channel with a bed slope of 0.015 and a Mannings n of 0.035. Tak a distance between cross-sections of 3000 ft. The base flow is 200 cfs, the peak flow is 2000 cfs. The peak time is 1 hour and the recession times is 2 hours. Show excel spreadsheet.

Reference no: EM13310769

Questions Cloud

How much time elapses before the ballast bag hits the ground : A hot-air balloon is rising straight up with a speed of 1.82 m/s, How much time elapses before the ballast bag hits the ground
Explain what is the ph of the buffer that results : What is the PH of the buffer that results when 12.0 g of NaH2PO4 and 8.00 g of Na2HPO4 are diluted with water to a volume of .50 L? (Ka of H2PO4=6.2*10^-8, the molar masses are 120.0 g/mol and 142. mol respectively.
Determine the common velocity just after the collision : The bus B has a weight of 15,000 lb and is traveling to the right at 5ft/s. Meanwhile a 3,000 lb car A is traveling at 4ft/s to the left. If the vehicles crash head-on and become entagled, determine their common velocity just after the collision.
Explain how many moles of the solid will form : If 4.21*10^-3 moles of Ca^2+ react with excess PO4^3- to form calcium phosphate, how many moles of the solid will form.
Determine a distance between cross-sections : Route a trianglular hydrograph through a 100 foot wide rectangular channel with a bed slope of 0.015 and a Mannings n of 0.035. Tak a distance between cross-sections of 3000 ft.
Find the mechanical energy of a block-spring system : Find the mechanical energy of a block-spring system having a spring constant of 0.67 N/cm and an oscillation amplitude of 1.5 cm
Estimate the required removal efficiency of particles in esp : An electrostatic precipitator (ESP) is being designed to collect flue gas particles at a power plant. The following information has been collected: electric field intensity = 100,000 V/m, and average particle charge = 0.30 fC (1 fC = 10-15 C).
Find the magnitude of the maximum blade acceleration : In an electric shaver, the blade moves back and forth over a distance of 2.0 mm in simple harmonic motion, with frequency 122 Hz. find the magnitude of the maximum blade acceleration
What is the magnitude of the maximum force acting on it : A 0.32 kg body undergoes simple harmonic motion of amplitude 9.1 cm and period 0.40 s. What is the magnitude of the maximum force acting on it

Reviews

Write a Review

Civil Engineering Questions & Answers

  In which circumstance are multiple copies of unicast frame

1. In which circumstance are multiple copies of the same unicast frame likely to be transmitted in a switched LAN. 2.If you want to disable STP on a port connected to a server, which command would you use

  Estimate the diffusion distance of a carbon atom in fe

The variation in the diffusion coefficient with temperature, over an appropriate range of temperature, can usually be approximated as follows: D= (D0)e^-(Q/(KT) where, Q = activation energy (eV/atom) and k = Boltzmann's constant (8.616*10-5 eV/ato..

  Determine what is the pressure of the air in the tank

When the ambient air is at 70 degrees Fahreneit, 14.7 psia, and contains 21% oxygen by volume, 4.5 lb of air are pumped into a scuba tank, capacity 0.75 ft^3. What volume of ambient air was compressed

  Determine what is the final concentration of cfu-l

A hypothetical water treatment train consisting of coagulation/flocculation unit, filtration unit and chlorination system is used to treat surface water characterized by bacterial concentration of 800,000 CFU/L.

  What are the running speed and overall speed of the train

A commuter train has stations spaced 1 mi apart. The top speed of the train is 80 mph. The train accelerates at 5.5ft/sec2 and decelerates at 4.5 ft/sec2. It dwells at the platform for 20 sec to pick up passengers.

  Determine the minimum green time for each approach

A traffic signal control is being designed for a four-leg intersection on a divided highway with the characteristics shown in the table below. Determine an appropriate length of the yellow interval for each approach and how you will provide it.

  Determine what is the gas pressure in the tank in bar

Two kg of oxygen at 40C are contained in a 2 m3 closed rigid tank. Assuming that oxygen behaves as an ideal gas under these conditions, what is the gas pressure in the tank in bar.

  Explain qualitative difference between the sine and tangent

Determine the percent error n in replacing the sine and the tangent of an angle by the value of the angle in radians for angle values 5 degrees, 10 degrees, and 20 degrees. Explain the qualitative difference between the sine and tangent results.

  Determine what is the force in the wire and beam

The 5-m long cantilever beam using a W410 x 67 standard wide flange section has a distributed load of 1200 N/m placed on it. It is also supported by a cable at B, of length 2 m with a 7 mm2 cross sectional area. What is the force in the wire

  Calculate the moment of inertia for the milkyway

calculate the moment of inertia for the Milkyway. Assume it to be a disk.

  Determine the practical moment strength phi-msubn for steel

determine the practical moment strength phi x Msubn for a rectangular reinforced concrete cross section having a width (b of 13 in.) and an effective depth (d of 24 in.) The tension reinforcing steel is four no# 8 bars.

  What is the maximum column load in kips that could be placed

What is the maximum column load in kips that could be placed on a 4-ft square temporary footing on a sand for which the standard resistance is about N=15 and the water table is at the surface A factor of safety of 2 is to be maintained against bea..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd