Design the simplest circuit that implements the function

Assignment Help Electrical Engineering
Reference no: EM13251205

1. Use the Quine-McCluskey minimization method to find a minimum cost SOP realization of the following functions:

(a) f(x1,x2,x3,x4)= fm(0,2,4,5,7,8,9,15)

(b) f(x1,x2,x3,x4)= fm(0,4,6,8,9,15) + d(3,7,11,13)

2. Design the simplest circuit that implements the function f(x1,x2,x3)= fm(1,3,4,6,7) using NAND gates only.

Reference no: EM13251205

Questions Cloud

What will be the appropriate values of quantizing level l : A binary channel with capacity 36 k bits/sec is available for PCM voic transmission. If signal is band limited to 3.2 kHz, then what will be the appropriate values of quantizing level L and the sampling frequency.
Identify which financial ratios are most in need : Pick a Corporation and identify which financial ratios are most in need of improvement and explain why you think so.
Find the distance between the two spectral lines : A light source emits two spectral lines: one at 528 nm and one at 667 nm. what is the distance between the two spectral lines in the first order spectrum
What is the input impedance of the line if it is l km long : What is the propagation constant at 500 MHz. Use the fact that the velocity of an EM wave in a lossless air-filled line is the same as that of free-space propagation in air. That is, the propagation constant is the same.
Design the simplest circuit that implements the function : 1. Use the Quine-McCluskey minimization method to find a minimum cost SOP realization of the following functions (a) f(x1,x2,x3,x4)= fm(0,2,4,5,7,8,9,15) (b) f(x1,x2,x3,x4)= fm(0,4,6,8,9,15) + d(3,7,11,13)
Which of the following is the most accurate statement : No securities that are offered for sale in the U.S. are exempt from the registration requirements of the Securities Act of 1933.
How much total time is the ball airborne : a ball is tossed directly upward at an initial speed of 5.7m/s and is caught when it falls back down to the throwers hand, how much total time is the ball airborne
How the switch is closed instantaneously : A Vs equals 1V source impedance 25ohms is connected by a switch to a 50-ohms lossless air transmission line 1 m long, terminated in a load of 30-ohms. At time t=0s, the switch is closed instantaneously to launch a step voltage down the line.
What is the maximum energy stored by the inductor : A 1.5-H inductor is connected in series with a 200-Ω resistor through a 15-V dc power supply and a switch, what is the maximum energy stored by the inductor

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Design a voltage divider to provide a voltage

1.5V battery. Design a voltage divider to provide a voltage that is approximately 1/3 of the battery voltage. Use resistances in the kilo ohms range. Redesign your divider so that the resistors are in Mega ohms range.

  Use the interrupt-driven approach

Store the arrival times in memory locations starting from $1000.(Do this is in C. Store the results in an array and don't worry about the speci c location of the results.)

  Explain what is the equivalent uniform annual cost

Machine A was purchased three years ago for $10,000 and had an estimated market value of $1,700 at the end of its 10-year life. Annual operating costs are $1,350. The machine will perform satisfactorily for the next seven years.

  Explain what is the primary purpose of a resistor in series

What is the primary purpose of a resistor in series with a LED being driven by a flip-flop?

  Calculate the losses in the transformer under the conditions

calculate the losses in the transformer under these conditions. losses and efficiency when the transformer delivers its rated power to a load having a power factor of 90%

  Is the potential at the point positive-negative or zero

Suppose that the source charges of the two previous problems are present together. The potential at infinity is defined to be 0. a. Is the potential at the point (0.5, 0.5, 0.5) positive, negative, or zero b. Is the potential at (4, 4, 4) positive

  How to write f as a canonical sum-of-products

(a) Write f as a minterm list (that is, in the form fm(*)). (b) Write f as a canonical sum-of-products. (c) Simplify the expression from part (b). (d) Write f as a maxterm list (that is, in the form fM(*)). (e) Write f as a canonical product-of-sums...

  Find a unity feedback control system with an unstable plant

Design a PD Controller G_c(s) = K_p + K_d*s using the root-locus method such that the closed-loop system has a damping ratio, zeta = 0.7 and a natural frequency, omega_n = 0.5 rad/sec.

  Explain blank leading zeros in the tens digit of the display

Using Multisim, design a mod-100 BCD counter that drives a 2-digit, 7-segment display. The count sequence will be 0 through 99. Blank leading zeros in the tens digit of the display.

  Calculate the voltage across each element

A resistance of 40 ohms is connected in series with an inductance of 0.12 H. Calculate the current, power, reactive power, apparent power, and power factor when the combination is connected to a 60 Hz, 120 V source.

  Determine the flux per pole in the machine

A permanent magnet dc motor has two poles and a simplex lap winding of 18 loops and 3 turns per loop. The armature radius is 4 cm and the armature length is 15 cm. The flux density under the poles is 0.74 T.

  Find the probability of bit errors occurring in the frame

Let the probability of a bit error be p, and the length of a data frame be N. Find the probability of 1, 2, 3, and 4 bit errors occurring in the frame. a) Tabulate the results for N = 1000, 10000, and 100000 bits, for p = 10-6, 10-8, and 10-14

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd