Design the rapid-mix system by providing water point

Assignment Help Civil Engineering

Reference no: EM13562598

The town of Eau Gaullie has requested proposals for a new coagulation water treatment plant. The design flow for the plant is 0.1065 m 3 /s. The average annual water temperature is 19'C. The following design assumptions for a rapid-mix tank have been made:

1. Number of tanks 1 (with 1 backup spare)

2. Tank configuration: circular with liquid depth 2 diameter

3. Detention time 10 s

4. Velocity gradient 800 s 1

5. Impeller type: turbine, 6 flat blades, N p 5.7

6. Available impeller diameters: 0.45, 0.60, and 1.2 m

7. Assume B (1/3) H

Design the rapid-mix system by providing the following:

1. Water power input in kW

2. Tank dimensions in m

3. Diameter of the impeller in m

4. Rotational speed of impeller in rpm

Reference no: EM13562598

Questions Cloud

Estimate what is the motors power consumption : A certain electric motor draws a current of 10 A whenconnected to 120V. hat is the motor's power consumption

Determine the value of p for which motion occurs : Two 8-kg blocks A and B resting on shelves are connected by a rod of negligible mass. Knowing that the magnitude of a horizontal force P applied at C is slowly increased from zero

With what velocity will air exit under a small crack in the : Laboratory clean rooms are often kept at a slightly higher pressure than ambient pressure in order to flush out particulates and keep dust from getting in. If the pressure in such a room is equivalent to 1 mm water greater than the surrounding rooms

How far is the surface of the snow from the device : A sonic depth gauge is placed 5m above the ground. Anultrasound pulse sent downward reflects off snow depth depends onthe device using the correct air temperature is 0C. How far is the surface of the snow from the device

Design the rapid-mix system by providing water point : The town of Eau Gaullie has requested proposals for a new coagulation water treatment plant. The design flow for the plant is 0.1065 m 3 /s. The average annual water temperature is 19'C. The following design assumptions for a rapid-mix tank have been..

Determine the force it exerts on the path when it arrives : A 2-kg block slides on the smooth circular path (Quadrant One of full circle, block moving left to right). If it is released from rest when theta=0 degrees, determine the force it exerts on the path when it arrives at Point A (Located theta=30 degree..

Evaluate what is the final velocity of the probe : A 6090 kg space probe moving nose first toward Jupiter at 105m/s relative to the Sun fires its rocket engine, What is the final velocity of the probe

Find the inertia tensor about the origin for a mass : Find the inertia tensor about the origin for a mass of uniform density=1,inside the part of the unit sphere where x>0,y>0,and find the principal moments of inertia and the principal axes.

Find the volume ofaluminum used to make the can : A full can of soda has a mass of 0.412 kg. It contains 3.32 10-4 m3 of liquid. Assumingthat the soda has the same density as water, find the volume ofaluminum used to make the can

User Account

All Pages