Design a two position controller

Assignment Help Electrical Engineering

Reference no: EM131393038

Using the system of Figure 5, design a two-position controller with a 0- to 10-V input and a 0- or 10-V output. The setpoint is 4.3 V and the neutral zone is to be about this setpoint.

961_Figure 2.jpg

Reference no: EM131393038

Questions Cloud

Design a pd controller : Design a PD controller with a 140% PB and a 0.2-min derivative time. The fastest signal speed is 1 min. Measurement range is 0.4 to 2 V, and the output is 0 to 10 V.

Design a pb controller for motor speed control : Design a 45% PB controller for motor-speed control. The motor speed varies from 100 to 150 rpm for an input control voltage of 0 to 5 V.

Design a two position controller with trip points : It has a 5-mW/°C-dissipation constant. Design a two-position controller with trip points of 35°C and 60°C. Keep self-heating below 0.5°C.

Design a two position controller : Design a two-position controller that provides an output of 5 V when a type-J TC junction reaches and drops to a low of 0 V when the temperature has fallen to . Assume a reference.

Design a two position controller : Using the system of Figure, design a two-position controller with a 0- to 10-V input and a 0- or 10-V output. The setpoint is 4.3 V and the neutral zone is to be about this setpoint.

What is the range of error voltage as position varies : A sensor converts position from 0 to 2.0 m into a 4- to 20-m A current. - If Vsp = 1.5 V, what is the range of error voltage as position varies from 0 to 2.0 m?

Design a fourbar linkage to carry the bolt : To the linkage solution from Problem 5-35, add a driver dyad with a crank to control the motion of your fourbar so that it cannot move beyond positions one and three.

Design a pin-jointed fourbar linkage : Choose three positions of the roll including its two end positions and synthesize a substitute mechanism. Use a link similar to the existing V-link as one of your links. Add a driver dyad to limit its motion to the range desired.

Express the integral controller constant : An integral controller has a reset action of 2.2 minutes. Express the integral controller constant in-1. Find the output of this controller to a constant error of 2.2%

User Account

All Pages