Design a three-digit 12-bit incrementor and derive the code

Assignment Help Electrical Engineering
Reference no: EM13230737

The binary-coded-decimal (BCD) format uses 4 bits to represent 10 decimal digits. For example, 259 is represented as "0010 0101 1001" in BCD format. A BCD incrementor adds 1 to a number in BCD format. For example, after incrementing, "0010 0101 1001" (i.e., 259) becomes "0010 0110 0000" (i.e., 26010). 1. Design a three-digit 12-bit incrementor and derive the code.

Reference no: EM13230737

Questions Cloud

State the boiling points of hcl and co2 are nearly the same : The boiling points of HCl and CO2 are nearly the same (-85 degrees C and -78 degrees C). Explain why CO2 can be removed from an aqueous solution by boiling briefly while essentially no HCl is lost even after boiling for one hour or more
Determine the probability that each of the pick is a nokia : A family selects two phones from a box containing cellphones: four are Nokia, marked N1, N2, N3, and N4. The other three are Samsung, marked S1, S2, and S3. Two phones are picked randomly in succession without replacement.
Explain the structure of an ester of 2-methylpropionic acid : what is the structure of an ester of 2-methylpropionic acid that has the molecular formula: C8H13ClO2 and 5 signals in its 1H NMR spectrum?
Incorporate the legal terminology : Tort law permeates society and daily life. Think of a tort issue in your life or in the life of someone close to you. Describe the issue. Perhaps you did not pursue litigation, but after gaining knowledge in this class, do you think you should hav..
Design a three-digit 12-bit incrementor and derive the code : The binary-coded-decimal (BCD) format uses 4 bits to represent 10 decimal digits. For example, 259 is represented as "0010 0101 1001" in BCD format. A BCD incrementor adds 1 to a number in BCD format. For example, after incrementing, "0010 0101 10..
Compute the mass in grams of copper initially : Calculate the mass in grams of copper initially present in the penny based on the concentration of copper in the sample, the total volume of the sample, the dilutions to the original stock, and the molar mass of copper.
Design a remote access control policy for richman : Richman Investments is an investment and consulting firm. The company wants to expand its business operations both in the U.S. and in foreign countries. It intends to eventually have 10,000 employees in 20 countries.
Find per-unit resistance of load on base for low-voltage : Three Single-Phase two-winding transformers, each rated 25 MVA, 38.1/3.81 kV, are connected to form a three-phase Wye-Delta bank with a balanced Y-connected resistive load of 0.6 ohms per phase on the low-voltage side.
Compute the ph for a neutral solution : Values for Ksp at O degrees C, 50 degrees C, and 100 degrees C are 1.14X10^-15, 5.47X10^-13, and 4.9X10^-14 respectively. Calculate the pH for a neutral solution at each of these temperatures.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  How is crude oil formed

1.How is crude oil formed ?How is it found/discovered ? 2.How is natural gas formed? (Start with plankton) and include crude oil formation.

  Construct the adder for 2 digit decimal numbers

Construct the adder for 2 digit decimal numbers presented in BCD code. 4 bit binary adders and additional logical gates. The BCD adder for each decimal digit can be implemented with two 4 bit binary adders where the second adder.

  At what temperature are the two carrier densities equal

At what temperature are the two carrier densities equal?

  Write an assembly language program to turn the stepper motor

Write an assembly language program to turn the stepper motor. Start a new project. Set bits 1 to 4 of PORT P ($25A) to 1 (output direction) Do not set bits 0, and 5-7, setting these bits may produce unexpected results.

  Identify the output samples influenced by boundary effects

The frequencies of the tones are 100 Hz, 300 Hz, and 450 Hz. The sampling rate is 1 kHz. Describe a low pass, a band pass, and a high pass filter that could be used to detect the individual tones.

  How to evaluate power dissipated in the components

how to evaluate power dissipated in the components of an RLC series circuit by using matlab software?

  Explain signals obtained separately in the radio receiver

How are the left (L) and right (R) signals obtained separately in the radio receiver to drive the dual channel audio amplifier and speakers?

  What is the total number of electrons transported

What is the total number of electrons transported from the positive electrode to the negative electrode by the charge escalator from the time the battery is first used until it is completely dead?

  Determine the minimum number of bits required in pcm

1) Determine the dynamic range for a 10-bit sign-magnitude PCM code 2) Determine the minimum number of bits required in a PCM code for a dynamic range of 80 dB. What is the coding efficiency

  Determine the range of load resistances over the circuit

a) Determine the range of load resistances over which the circuit gives a constant Vout if Rs = 1500 kilo ohms and Vs = 150V. Assume the diode breakdown voltage is 100V and the maximum rated current is 100 mA.

  Describe bandpass filters with any center frequency

an Armstrong indirect FM modulator to generate an FM carrier with a carrier frequency of 96 MHz and deviation of f=20 KHz. A narrowband FM generator with Fc=200 KHz and adjustable deviation f in range of 9 to 10 Hz is available.

  Design a 4-bit synchronous up-down counter

Design a 4-bit synchronous up/down counter using T flip-flops. The circuit has one input up' /down such that input 0 means count up and input 1 means count down. up' is "up" with a bar over it

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd