Design a system that repeatedly computes and outputs

Assignment Help Electrical Engineering
Reference no: EM13286649

Design a system that repeatedly computes and outputs the sum of all positive numbers within a 512 word register file A consisting of 32-bit signed numbers.

Reference no: EM13286649

Questions Cloud

Compute the mass of nitrogen n2 that will react : Calculate the mass of Nitrogen (N2) that will react completely with 6.00g of Hydrogen (H2) to form Ammonia. Via the Reaction: N2+3H2=2NH3
Explain the hydrogen atom during the electronic transition : Consider the electronic transition from n = 2 to n = 4 in a hydrogen atom and select the correct statement below.
Find what is the voltage level at the amplifier output : A power amplifier has a gain of 20 dB and an input level of 2 volts. Assuming that the input and output impedances are the same, what is the voltage level at the amplifier output
Evaluate the final concentration of the diluted solution : Describe in detail how you would prepare a solution with a concentration near 0.10 M from a 0.650 stock solution. Calculate the final concentration of the diluted solution. It should be within 10% of 0.10 M
Design a system that repeatedly computes and outputs : Design a system that repeatedly computes and outputs the sum of all positive numbers within a 512 word register file A consisting of 32-bit signed numbers.
Write program that accurately does normalized power pattern : The first element is located at the origin and the magnitude of the current on each element is: Element 1: i1=d1 (at z=0), Element 2: i2=d2 (at z = quarter wavelength), Element 3: i3=d3 (at z=half wavelength), Element 4: i4=d4
Explain the equilibrium partial pressures of no and o2 : Nitrogen dioxide decomposes according to the reaction. kp=4.48X10^-13 at a given temperature. If 0.6 atm of NO2 is added to a container and allowed to come to equilibrium. What are the equilibrium partial pressures of NO and O2
Explain what volume will the soild occupy : At 25 C the density of water is 0.997 g/cm^3, whereas the density of ice at -10 C is 0.917 g/cm^3. if a plastic soft-drink bottle (volume=250mL) is filled with pure water capped and then frozen at -10 C what volume will the soild occupy
Find the number of full payments needed : A debt of $4000 with interest at 12% compounded semi annually, is to be repaid by semi-annual payments of $400 each. Find the number of full payments needed and the final payment.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  How long after sudden dark-to-light flash before cell output

A photocell with a 35-ms time constant is used to measure light flashes. How long after a sudden dark-to-light flash before the cell output is 80% of the final level

  Calculate maximum torque and power factor at max torque

A twelve pole, 480V, 60Hz synchronous motor has a reactance of 5 ohm. The field current is adjusted so that the equivalent field voltage Ef is 520V (line-to-line). Calculate the following: (a) Maximum torque. (b) Power factor at the maximum torque..

  What is the type and stability of the critical point

Determine the coefficients p, q, and the determinant (delta) of the system: y1'=y1 + 10y2 Y'2=7y1 - 8y2 Based on these values, what is the type and stability of the critical point

  Find the aliased frequency of the signal

Determine the location of the peaks in the following sampled spectrum for the following sine waves: (a.) signal frequency = 300 Hz; sampling frequency = 1 kHz (b.) signal frequency = 600 Hz ; sampling frequency = 1 kHz

  Find the maximum rectangular area that can be enclosed

find the maximum rectangular area that can be enclosed with 1400 feet of fence if one side of this are lies along a straight section of a river and does not require fencing.

  Find the zero-input and zero-state components of response

Find the output y[n] of an LTID system specified by the equation 2y[n+2] - 3y[n+1] = y[n] = 4x[n+2] - 3x[n+1]if the initial conditions y[-1] = 0, y[-2] = 1, and the input x[n] = (4)^-n u[n]

  Sketch the b-mode image

Assume the z0 is in the far field and derive an expression for the strength to return as a function of angle. Make approximations where appropriate and do not forget the sidelobes.

  Determine the frequency response for the lti system

determine the frequency response for the LTI system specified by the LCCDE y[n] - 0.8y[n -1] = x[n]. Plot the magnitude response and phase response for -pie

  Find distance l required to make the effective focal length

Two lenses of focal length f1 and f2, made from the same glass, are spaced by distance L. The effective focal length of the pair is related to refractive index n by f^(-1) = (n-1)a + (n-1)b - L((n-1)^2)ab

  Indicate along the wire the product term it is implementing

Our third word problem case study described a logical "function unit" that computed the eight combinational functions of the inputs A and B: constant 1, A OR B, A NAND B, A XOR B, A XNOR B, A AND B, A NOR B, and constant 0.

  Calculate the number of electrons in a cubic meter of sodium

the atomic weight of sodium is 23 and the density is 0.97*103 kg/m3. calculate the number of electrons in a cubic meter of sodium.

  Find offset-step size-resolution and percetage resolution

Calculate the span, offset, step size, resolution, and percentage resolution for an analog range of 0 to 5 volts for 8-bit digital conversion. For such a system calculate the analog output of a D/A with the following digital inputs: $15, $4D, $7E,..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd