Design a shell and tube exchanger for the following duty

Assignment Help Chemical Engineering
Reference no: EM131157524

Design a shell and tube exchanger for the following duty.

20,000 kg/h of kerosene (42° API) leaves the base of a kerosene side-stripping column at 200 °C and is to be cooled to 90 °C by exchange with 70,000 kg/h light crude oil (34° API) coming from storage at 40 °C. The kerosene enters the exchanger at a pressure of 5 bar and the crude oil at 6.5 bar. A pressure drop of 0.8 bar is permissible on both streams. Allowance should be made for fouling by including a fouling factor of 0.0003 (W/m2 °C)-1 on the crude stream and 0.0002 (W/m2 °C)-1 on the kerosene stream.

Reference no: EM131157524

Questions Cloud

How does risk relate to getting the final work completed : How does risk relate to getting the final work completed? What can be done to induce fixed-price contractors to become more responsive?
What is the payback period for the set of cash flows : What is the payback period for the set of cash flows given above?
Estimate the capital cost of a plant to produce 20,000 : The process used in the manufacture of aniline from nitrobenzene is described in Appendix F, Design Problem F.8, which is available in the online material at booksite.Elsevier.com/Towler.
What impact will company politics have on the negotiation : What impact will company politics have on this negotiation? What risks exist for Dan at this point? How does this relate to what you learned in our negotiating assignment?
Design a shell and tube exchanger for the following duty : A pressure drop of 0.8 bar is permissible on both streams. Allowance should be made for fouling by including a fouling factor of 0.0003 (W/m2 °C)-1 on the crude stream and 0.0002 (W/m2 °C)-1 on the kerosene stream.
Perform aluation using the free cash flow valuation model : Nabor industries is considering going public but is unsure of a fair offering price for the company. The firm's CFO has gathered data for performing the valuation using the free cash flow valuation model.
What will be the main trade-offs : Formulate the objective function for optimizing the recovery of ethylene from an ethylene-ethane mixture. What are the key constraints? What will be the main trade-offs?
What alternatives are available to resolve the issues : What alternatives are available to resolve the issues? What type of contract incentive (s) could you adopt to make this case more successful and why?
What will be the bead products demand next year : Assume that all 1128 of units of Bead are sold in the Nano segment.- If the competitive environment remains unchanged what will be the Bead product's demand next year ?

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Calculate the density of states per unit volume

Determine the Probability that an Ahmed energy state is occupied by an election it the slide is above the Fermi level by KT.

  Derive an expression for the optimum economic thickness

Derive an expression for the optimum economic thickness

  Calculate the magnetic flux in the core

Now suppose a 10-mm air gap is cut across the toroid. Determine the current that must be supplied to the coil to produce the same value of magnetic flux density as in part (a). You may neglect leakage and fringing.

  Fresh rainwater or surface water

Fresh rainwater or surface water contains enough tritium ( ) to show 5.5 decay events per minute per 100. g of water. Tritium has a half-life of 12.3 years. You are asked to check a vintage wine that is claimed to have been produced in 1946.

  Emulsion polymerization of acrylonitrile

In a process for the production of acrylic fibers by the emulsion polymerization of acrylonitrile, the unreacted monomer is recovered from water by distillation. Acrylonitrile forms an zoetrope with water and the overhead product from the column c..

  Define mass of air required for combustion of fuel

Mass of Air Required for Combustion of Fuel. A coal fired boiler uses fuel having the following analysis by mass:

  Calculate the induced armature voltage at rated load

A 50-kW, 250-V, short-shunt compound generator has the following data: Ra = 0.06 Ω, RS = 0.04 Ω, and Rf = 125 Ω. Calculate the induced armature voltage at rated load and terminal voltage. Take 2 V as the total brush-contact drop.

  Random substitution of chlorine atoms for hydrogen

High-density polyethylene may be chlorinated by inducing the random substitution of chlorine atoms for hydrogen.

  Thick-walled neoprene rubber sphere

Hydrogen gas at a pressure of 1.25 bar is contained in a thick-walled neoprene rubber sphere which has inner and outer radii of 70 mm and 80 mm, respectively.

  Calculate the gross torque developed for a flux per pole

A four-pole, dc series motor has a lap-connected, two-layer armature winding with a total of 400 conductors. Calculate the gross torque developed for a flux per pole of 0.02 Wb and an armature current of 50 A. (Note: The number of parallel paths i..

  Describe the electronic data processing steps needed

How have the technological advances in personal computing made this conversion faster and the speech output more lifelike?

  Calculate the entropy change of methanol

One mol of methanol vapor is cooled under constant pressure in a closed system by removing 25000 J of heat. Initially, the system is at 2 bar, 200 °C.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd