Design a fir filter that eliminates the frequency components

Assignment Help Electrical Engineering
Reference no: EM13286382

A speech signal with bandwidth B= 10 Khz is sampled at F2 = 20 KHz. Suppose that the signal is corrupted by four sinusoids with frequencies.
F1 = 10,000 Hz ,F2 = 8889 Hz, F3 = 7778 Hz , F4 = 6667 Hz

A. Design a FIR filter that eliminates these frequency components.
B. Choose the gain of the filter so that |H(0)| = 1 and then plot the log magnitude response and the phase response of the filter.

perform the following tasks and show them with the results in your project report, using LabVIEW. You can use Matlab to verify and compare your results obtained by LabVIEW.

All the plots must be labeled very well with clear captures and good explanations of what they are:

(a) Use figures, as much as it is necessary, to explain your approach, comments, analysis, results, and your design.
(b) Plot impulse response

Reference no: EM13286382

Questions Cloud

Find capacitance c for partially-filled spherical capacitor : Find the capacitance C for the partially-filled spherical capacitor consisting of an inner conducting sphere of radius a and an outer conducting sphere of radius c with the region a
Transactions would occur without a financial intermediary : Use 2 transactions in recent financial news to illustrate and explain the roles of financial intermediaries, and banks in particular, in these transactions.Furthermore, explain how these transactions would occur without a financial intermediary.
Define the half-life for the radioactive decay : The half-life for the radioactive decay of is 5730 years. How long will it take for 20% of the atoms in a sample of to decay. If a sample of initially contains 1.1 of , how many millimoles will be left after 2285 years
How large will this payment be : At the end of the 3 years, you are expected to repay the remaining balance in one installment. How large will this payment be? Please show each step of your reasoning.
Design a fir filter that eliminates the frequency components : A speech signal with bandwidth B= 10 Khz is sampled at F2 = 20 KHz. Suppose that the signal is corrupted by four sinusoids with frequencies. F1 = 10,000 Hz ,F2 = 8889 Hz, F3 = 7778 Hz , F4 = 6667 Hz
Explain the half-life for the radioactive decay : The half-life for the radioactive decay of is 5730 years. How long will it take for 20% of the atoms in a sample of to decay. If a sample of initially contains 1.1 of , how many millimoles will be left after 2285 years
What would be the future value : Find the future value of $10,000 invested now after five years if the annual interest rate is 8 percent.
Design a low pass filter of gain 40 db and corner frequency : Design a low pass filter of gain 40 dB and corner frequency is 60 Hz assuming signal has a source of resistance = 100 ohms ( YOU want error propagation in pass band to be
What is the present value of john savings : John West is 40 years old. He is a young executive and his salary is $1 mil a year. His income is expected to grow at 10% for every year he works. John wants to retire at 55 and he wants to save 20% of his salary every year. John can invest at 7%.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What are the maximum and minimum values for the if

A 10 kHz signal modulates a 500 MHz carrier, with a modulation index of 2. What are the maximum and minimum values for the instantaneous frequency of the modulated signal

  What is the torque developed in the armature

A dc motor takes an armature current of 105 A at 480 V when running at 720 rpm . The resistance of the armature circuits is 0.2 Ω and the field resistance is 96 Ω what is the torque developed in the armature

  Why power factor correction capacitor is connected in series

The power factor of a load connected to a 120-V 60-Hz source is raised from 0.866 lagging to 0.966 leading by connecting a 110.5-F capacitor in parallel with the load. Determine the load current I1 and the circuit current IT

  Find equivalent of four resistors are connected in parallel

Four Resistors are connected in parallel. what is the equivalent resistance if their individual resistances are  r1 =100 Ohms ±5% tolerance r2 =470 Ohms ±5% tolerance r3 =330 Ohms ±10% tolerance r4 =1000 Ohms ±5% tolerance

  Determine parameters of the equivalent circuit

Rated voltage is applied to the low voltage winding and the high voltage winding is open-circuited. Under this condition, the current into the low voltage winding is 2.4 A, and the power taken from the 2400 V source is 3456 W.

  What type of electron transition from valence to conduction

1) When discussing the generation of electron/ hole pairs by light in semiconductors is it best to use the wave or particle rendition of light energy. 2) In what type of electron transition from valence to conduction band is momentum conserved, dir..

  Calculate the flux of the electric field created by the cube

Consider a uniformly charges cylinder (radius R, height H, charge density ρ). Imagine it at the center of a cube (sides of length L). Calculate the flux of the electric field created by the cylinder through the surface of the cube.

  Find the inductance l and capacitance c of the circuit

The bandwidth of a series resonant circuit is 400 Hz. (a) If the resonant frequency is 4000 Hz, find Q. (b) If R = 10?, what is the value of XL at resonance (c) Find the inductance L and capacitance C of the circuit.

  Determine the peak current and peak inverse voltage

A 20 vrms, 60 hz ac source is in series with an ideal diode and a 100 ohm resistance. Determine the peak current and peak inverse voltage (PIV) for the diode

  Present 1-possible state assignment for finite state machine

The output is asserted high (Z=1) whenever the input sequence 1101 has been observed during the past four clock cycles, as long as 1001 has never been observed. Draw the state diagram for the finite state recognizer. (Overlapping sequences are all..

  How long in seconds would it take to discharge the capacitor

A 2 farad capacitor is charged up to 400v by a dc power supply. How long in seconds would it take to discharge the capacitor to a safe stored energy level of 1 joule using a 1k ohm high wattage resistor bank.

  Find what is the magnitude of the magnetic field

The torque produced by an external magnetic field is torque = D[5i,-3j] where D is a positive constant, and for this orientation of the loop the magnetic potential energy U = -mu cross B is negative. The magnitude of the magnetic field is 14D/IA

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd