Design a compensation network

Assignment Help Civil Engineering

Reference no: EM131344448

A thermocouple data logger has a built-in circuit to compensate for the temperature of the connecting board which is used for mounting the thermocouples. A test is to be performed on the circuit by measuring the temperature of the board and the compensating voltage generated internally. If the temperature of the board is measured as 50?F, what should be the compensating voltage, and to what tolerance should it be maintained so that the compensation is accurate within ±0.2?F? Assume iron-constantan thermocouple.

Reference no: EM131344448

Questions Cloud

Write the sum in the time domain : The sum of the two voltage phasors shown in given Figure is V3.- If the frequency is 60 Hz, write the sum in the time domain, v3 (t).

Solution with dissolved sodium cyanide : A weak acid HCN is in solution with dissolved sodium cyanide, NaCN. If NaOH is added which chemical will react with the added NaOH to keep the pH from changing?

Chemicals in solution : A buffer solution is prepared by dissolving 0.35 mol of NaF in 1.00 L of 0.53 M HF. Which of the following is true about the chemicals in solution?

Transform the sinusoids into phasor form : Transform the following sinusoids into phasor form and draw a phasor diagram. Use the additive property of phasors to find v1(t) + v2(t) + v3(t).

Design a compensation network : If the temperature of the board is measured as 50?F, what should be the compensating voltage, and to what tolerance should it be maintained so that the compensation is accurate within ±0.2?F? Assume iron-constantan thermocouple.

Difference between the two classifications : Can you please help me this these questions in a well developed paragraph. What are fermions and bosons? What is the difference between the two classifications?

Summarize your plan in a two to three paragraph post : You have been tasked with identifying those main stakeholders and selecting the method for communicating with each group. Summarize your plan in a two to three paragraph post.

Calculate the true temperature of the air : The initial temperature of the sphere is 20?C. Plot the output of the thermocouple as a function of time. What is the time constant?

Find the calorimeter constant : Experiment 1: Find the Calorimeter Constant Take a constant temperature bath from the Instruments shelf and place it on the workbench. Run the bath at 60 °C. Take an Erlenmeyer flask from the Containers shelf and place it on the workbench.

User Account

All Pages