Design a combinational logic with 3 inputs x-y and z

Assignment Help Electrical Engineering

Reference no: EM13275956

Design a combinational logic with 3 inputs x, y and z and three outputs A,B C. When the binary input is 0,1,2 or 3 the binary output is two greater than the input. When the binary input is 4,5,6,7 the binary output is 3 less than the input.

Reference no: EM13275956

Questions Cloud

Design sequence generator circuit with 4 outputs w-x-y and z : Design a sequence generator circuit with 4 outputs W,X,Y and Z. The circuit should generate the following sequence of output patterns: 0001, 0011, 1100, 1000. After 1000, the circuit should repeat the sequence starting at 0001 again.

Find the time constant of the rc circuit : the time constant of an RL circuit with L=25mH is six times larger than the time constant of an RC circuit with C=55uF. Both circuits have the same resistance R. What is the time constant of the RC circuit?

Explain the electric field at the surface of a charged : The electric field at the surface of a charged, solid, copper sphere with radius 0.160m is 3400N/c , directed toward the center of the sphere.

Potential difference across the capacitor : Two 2.00 cm X 2.00 cm plates that form a parallel-plate capacitor are charged to ± 0.708 nC. had are the electric field strength inside and the potential difference across the capacitor if the spacing between the plates is (a) 1.00 mm and (b) 2.00 ..

Design a combinational logic with 3 inputs x-y and z : Design a combinational logic with 3 inputs x, y and z and three outputs A,B C. When the binary input is 0,1,2 or 3 the binary output is two greater than the input. When the binary input is 4,5,6,7 the binary output is 3 less than the input.

Explain a very long insulating cylindrical shell of radius : A very long insulating cylindrical shell of radius 6.70cm carries charge of linear density 8.60Nc spread uniformly over its outer surface

Derive the full deravtion to obtain the optimum thershold : in the process of sampling an analog signal g(t) is multiplied by a periodic train of rectangular pulses c(t)each of unit area ,given that the pulse repetition frequency of this periodic train is fs and the duration of each rectangular pulse is T ..

Explain an electron is placed on the ring''s axis a distance : A uniformly charged thin ring has radius 14.5cm and total charge 23.0nC . An electron is placed on the ring's axis a distance 30.0cm from the center of the ring and is constrained to stay on the axis of the ring. The electron is then released from..

What speed must the rod have : The light bulb in the circuit has a resistance of 11 ohms and consumes 6.7 W of power as the 1.25 m long, What speed must the rod have if the current in the circuit is to be 0.65 A

User Account

All Pages