Design a circuit to control the temperature

Assignment Help Physics
Reference no: EM1322142

Design a circuit to control the temperature of a water bath at a set-point temperature of 85°C. Choose a resistive sensor and draw up a circuit that will provide control around the set-point. Suggest values for all the components to be used. Heat can be supplied to the bath from a power amplifier that requires 0-0.5V for zero to maximum power output.

Reference no: EM1322142

Questions Cloud

The rotational analog of newton''s second law : To which, according to the rotational analog of Newton's second law, is the angular acceleration experienced by an object directly proportional?
Find out its position as a function of time t : How many drops of water are in all the oceans on earth? Assume that contains 25 drops of water. Remember that this is an order-of-magnitude problem, so you should expect that you will only find rough estimates for the numbers you require.
Find the area of contact between each tire and the ground : A person who weighs 680 N is riding a 98-N mountain bike. Suppose the entire weight of the rider and bike is supported equally by the two tires. If the gauge pressure in each tire is 6.45 105 Pa, what is the area of contact between each tire and the ..
Find out the average speed of the fish : A man sitting in a bosun's chair that dangles from a massless rope, which runs over a massless, frictionless pulley and back down to the man's hand. The combined mass of the man and chair is 86 kg. With what force magnitude should the man pull on ..
Design a circuit to control the temperature : Design a circuit to control the temperature of a water bath at a set-point temperature of 85°C. Choose a resistive sensor and draw up a circuit that will provide control around the set-point.
Find out the gauge pressure at the bottom of the tank : A boat moves through the water of a river at 9 m/s relative to the water, regardless of the boat's direction. If the water in the river is flowing at 1.9 m/s, how long does it take the boat to make a round trip consisting of a 225 m displacement d..
Find the speed of the wreckage just after the collision : A 950-kg car traveling west at 15.0 m/s collides with a 750-kg car traveling north at 20.0 m/s. The cars stick together. Find the speed of the wreckage just after the collision
What is the initial (horizontal) velocity of the ball : A stone is thrown at a bell with the speed of 20m/s. The stone strikes the bell and the sound is heard 2.60 s after the stone was released. Speed of sound is 342m/s, how far is the boy from bell.
What is the acceleration due to gravity on the planet : Electrons which were initially at rest were subjected to a continuous force of 2×10-12 newton along the entire length of two miles (one mile is 1.6 kilometers) and reached speeds very near the speed of light.

Reviews

Write a Review

Physics Questions & Answers

  Final temperatures of the water and the aluminium

A 1500 kg car carrying four 87kg people travels over a rough "washboard" dirt road with corrugations 4.40 m apart which causes the car to bounce on its spring suspension. The car bounces with maximum amplitude while its speed is 19km/h. The car now s..

  What is the dipole contribution to the scalar potential

Charge is distributed with constant volume density D throughout the rectangular box with length a, width b and height c.

  Compute the thermal absorption cross section

Two particles of masses m and 3.00m are moving toward each other along the x-axis with the same speed v. They undergo a head on elastic collision and rebound along the x- axis. Find out the final speed of the heavier object.

  How much thermal energy is produced in the collision

A tow truck pulls a car 5.2 km along a horizontal roadway using a cable having a tension of 790.

  Draw a picture of a moving source

Draw a picture of a moving source and the waves surrounding it according to what you observed in this experiment. How does the spacing of the wavefronts in front of the source compare to those behind it?

  Cold fusion theory

Cold fusion theory.

  What impulse is delivered to wall

An 11g bullet is fired into an 11kg wood block that is at rest on the wood table. The block, with the bullet embedded, slides 5.11 across the table. The coefficient of kinetic friction for wood sliding on wood is 0.25.

  How much work was completed by friction on megan

Megan's mass is 27 kg. She climbs the 4.8 m ladder of a slide and reaches a velocity of 3.6 m/s at the bottom of the slide. How much work was completed by friction on Megan? Imagine that air resistance is negligible.

  How much energy is transferred to the water as heat

How much energy is transferred to the water as heat

  Density of beer at different weather condition

A Norwich MCE student is involved in a crucial out of class experiment. He is in his dorm room 34 feet above an historic rock wall. Describe the final result and state any assumptions that you need to make. Would the final result be any different o..

  Assume the fan coasts to a stop 29s

A robot probe drops a camera off the rim of the 389 m high cliff on Mars, where the free fall acceleration is 3.7 m/s^2. Find out velocity with which it hits the ground and the time required for it to reach the ground.

  What power is required of the force moving the cab

A thin, flexible metal plate attached at one end to the platform, can be used to measure mass. When the free end of the plate is pulled down and released, it vibrates in simple harmonic motion with a period that depends on the mass attached to the pl..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd