Design a 4-bitregister with two control inputs s1 and s0

Assignment Help Civil Engineering
Reference no: EM13534498

Design a 4-bitregister with two control inputs S1 and S0, four data inputs I3,I2,I1, I0, and four dataoutputs Q3, Q2, Q1, Q0. S1S0=00 means maintain the present value, S1S0=01means load, S1S0=10 means clear, and S1S0=11 means swap the high two bitswith low two bits. For example, 1100 will be 0011, and 1001 will be0110.

Reference no: EM13534498

Questions Cloud

What is the water wett ability index for the core : A cylindrical core, completely saturated with oil up to immobile water saturation, is immersed in water and the measured volume of oil displaced by imbibition of water
To what phmust the water be raised and maintained : A water contains contains 2.0 meq/LCa2+ and 1.3 meg/L Mg2+. If one wanted to remove the hardness species by hydroxide precipitation, to what pHmust the water be raised and maintained in order for both calcium and magnesium toform hydroxide solids?
Show these stresses on sketches of the elements : A plastic bar fit snugly between rigid supports at room temp. (68)but with no initial stress. When the temperature of a bar israised to 160 F the compressive stress on an inclined plane pqbecomes 1700 psi. a) What is the shear stress on the planepq? ..
Find the velocity of the lower stage after the explosion : A two-stage rocket moves in space at a constant velocity of 4900 m/s. What is the velocity of the 2400 kg lower stage after the explosion
Design a 4-bitregister with two control inputs s1 and s0 : Design a 4-bitregister with two control inputs S1 and S0, four data inputs I3,I2,I1, I0, and four dataoutputs Q3, Q2, Q1, Q0. S1S0=00 means maintain the present value, S1S0=01means
Is the ray bent toward the normal or away from it : According to the photon energy formula, tripling the frequencyof the radiation from a monochromatic source will change the energycontent of the individually radiated photons by what factor?
What magnitude emf is induced between the driver and : A pickup truck has a width of 78.7 in. Ifit is traveling north at 39 m/s through amagnetic field with vertical component of 32 µT, what magnitude emf is induced between the driver and passenger sides of the truck?
Determine the induced emf within a circle of tissue : Transcranial magnetic stimulation (TMS) is a noninvasive techniqueused to stimulate regions of the human brain. A small coil isplaced on the scalp, and a brief burst of current in the coilproduces a rapidly changing magnetic field inside the brain. T..
Sketch clearly the velocity and shear stress profiles : A film of newtonian liquid folws down the outside surface of avertical cylinder of radius R. the flow is steady, laminar andthe thickness of the film is constant.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the tsp emission rate of the power plant

On a clear summer afternoon with a wind speed of 3.20 m/s measured at 100 m elevation, the TSP (total suspended solids) concentration was found to be 1520 ug / m3 at a point 2 km downwind

  Determine the maximum bending stress in the strap

An L2 steel strap having a thickness of 0.125 in. and a widthof 2 in. is bent into a circular arc of radius 600 in. Determine the maximum bending stress in the strap.

  Calculate the stopping sight distance over the crest

Calculate the stopping sight distance over the crest of a 1,500 ft vertical curve with a plus grade of 4.4percent and a minus grade of 2.3 percent.

  Determine the coliform concentration of discharge effluent

The wastewater influent has a linear velocity of 0.5m/s and contains 3.0x10^5 fecal coliform colony unit (CFU) per liter. Determine the coliform concentration of the discharge effluent into Back river.

  Determine the critical depth and critical velocity for flow

A trapezoidal channel has a bed width of 3.5 m and a side slope of 30 degrees from the horizontal. Determine the critical depth and the critical velocity for a flow of 22 cubic meters per second.

  Develop equation that determines mass of finishing rods

When in use, a fishing rod can be approximated to act as a cantilevered beam. Assume that the force (P) is applied to the end of the beam by a fish while the fisherman rigidly holds the other end of the beam.

  What is the residence time of air in the room if rate is use

On average each student produces 1 kg of carbon dioxide per day. The recommended ventilation rate of fresh air to avoid excessive carbon dioxide buildup is 8 L per second per student.

  Determine the centroid for the region bounded by x-axis

Determine the centroid for the region bounded by the x-axis, the curve y=x^3, and the line x=3

  Determine mechanical properties of ametal by concucting test

if you were asked to determine the mechanical properties of ametal by concucting a test, what type of test whould you use, and what data can you abtain from that test

  Elevation of the road at station

Given the following data for a vertical curve of a road; G1=-2.5%, G2=+5.5% and station of PVI=250+50.At station 252+50, the vertical curve must intersect an existing road at elevation 48.48ft. the elevation on the tangent section at station 256+5..

  Determine the x coordinate of center of gravity of pulley

A flat-belt idler pulley is molded from polystyrene with a bronze bushing. Knowing that the densities of polystyrene and bronze are 640 kg/m3 and 9100 kg/m 3, respectively, determine the x coordinate of the center of gravity of the pulley.

  What average force was exerted on the ball

After falling from rest from a height of 32 m, a 0.45 kg ball rebounds upward, reaching a height of 22 m. If the contact between ball and ground lasted 1.5 ms, what average force was exerted on the ball?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd