Design a 4-bit down counter using d flip-flops

Assignment Help Electrical Engineering
Reference no: EM13255925

1. Design a 4-bit register with 2 control inputs s1 and s0; 4 data inputs I3, I2, I1, and I0; and 4 data outputs Q3, Q2, Q1, and Q0. When s1s0=00, the register maintains its value. When s1s0=01, the register loads I3....I0. When s1s0=10, the register clears itself to 0000. When s1s0=11, the register complements itself, so for example, 0000 would become 1111, and 1010 would become 0101.

2. Design an adder that computes the sum of four 8-bit numbers, using 8-bit carry ripple adders. Use a basic 8-bit carry-ripple adder as a building block for the design.

3. Use a magnitude comparator and logic to design a circuit that outputs 1 when a 4-bit input ‘a' is between 8 and 14, inclusive.

4. Design a 4-bit down counter using D flip-flops.

5. Optimize the function F 1 (a,b,c,d) = fm (0,1,3,4,7,10,11,12,14) using tabular method. Verify your answer with K-Map optimization? Show all your steps.

6. Optimize the function F 2 (a,b,c,d) fm (1,2,4,7,8,9,10,11,13) using tabular method. Verify your answer with K-Map optimization? Show all your steps.

7. Optimize the function F 3 (a,b,c,d) fm( 1,4,8,9,11,12,13,15) + d( 0,2,3,7) using tabular method. Verify your answer with K-Map optimization? Show all your steps.

Reference no: EM13255925

Questions Cloud

Explain the activation energy for the reverse reaction : The gas-phase reaction Cl(g)+HBr(g) => HCl(g)+Br(g) has an overall enthalpy change of -66kJ. The activation energy for the reaction is 7kJ. What is the activation energy for the reverse reaction?
How much energy is absorbed by the eardrum in minutes : A sound wave with an intensity level of 80.9 dB is incident on an eardrum of area 6.00 times 10-5 m2. How much energy is absorbed by the eardrum in 3.0 minutes
Explain accurately represents the rate law for the reaction : A reaction in which A, B, and C react to form products is first order in A, second order in B, and zero order in C. Which of the following most accurately represents the rate law for this reaction
What are the wavelengths of the emitted photons : A hydrogen atom in its ground state is excited to the n = 5 level. It then makes a transition directly to the n = 2 level before returning to the ground state. What are the wavelengths of the emitted photons
Design a 4-bit down counter using d flip-flops : Design a 4-bit register with 2 control inputs s1 and s0; 4 data inputs I3, I2, I1, and I0; and 4 data outputs Q3, Q2, Q1, and Q0. When s1s0=00, the register maintains its value. When s1s0=01, the register loads I3....I0.
Determine the force of kinetic friction on the block : A block slides upward on a rough, vertical wall at constant velocity when a force F of 60 N acts on it at an angle ? = 60? to the horizontal. Determine the force of kinetic friction on the block
What is the effective cost of factoring : The average credit sales for Jiffy Co. is $375,000. Accounts receivables average balance is $68,000. Jiffy factors its receivables by discounting them 3%. What is the effective cost of factoring?
Find personality and learning style testing : Find that personality and learning style testing simply confirms their earlier views, while others will find that it has enhanced or even altered their self understanding.
What pressure is exerted on the record : The pressure exerted by a phonograph needle on a record is surprisingly large. what pressure is exerted on the record in N/m2

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Define interpreting frequency domain signal spectrum

Interpreting frequency domain signal spectrum to time domain, A spectrum analyzer is connected to an unknown signal. The spectrum analyzer displays the voltage level of signals in volts vertically and frequency horizontally.

  Find the maximum phase deviation for the signal

Consider an angle-modulated signal xc(t) = 10 cos{(10^8)pi t + 5sin 2pi(10^3)t}. Find the maximum phase deviation. Find the maximum frequency deviation.

  Explain a capacitor is used in the electronic flash unit

A capacitor is used in the electronic flash unit of a camera. A small battery with a constant voltage of 6 V is used to charge the capacitor with a constant current of 10 microamperes. How long does it take to charge the capacitor

  What is the magnitude of the electric field

An electric flux of 151 Nm2/C passes through a flat horizontal surface that has an area of 0.715 m2. The flux is due to a uniform electric field. What is the magnitude of the electric field if the field points 10.3° above the horizontal

  Find the transfer function for a 2nd -order fir filter

Find the transfer function and the difference equation for a 2nd -order FIR filter that has unity d.c. gain, but for which the given input x(k) produces zero forced response. (Your filter will have a "notch" at the given frequency, and H(1) =1.)

  What is the effective data rate

What is the effective data rate of this transfer (not counting the time for reading or writing the DVDs)?

  Discriminate the middle of each raw data bit cell period

ManchesterEncodingFSM the clock (Clk_H) will need to run at a speed that is twice as fast as the clock that defines the boundaries of the RawSerialIn_H serial data bit cell this will allow the FSM to resolve or discriminate the middle of each raw ..

  Draw circuit that implements parallel bit-slice parity check

Draw circuit that implements parallel bit-slice parity checker. Its input is X=xn-1xn-2...x1x0 and it should produce output F=1 iff input X has even parity. Make sure to label all signals and ports.

  What will be the bit transmission rate for the time-division

Four voice signals. each limited to 4 kHz and sampled at Nyquist rate are converted into binary PCM signal using 256 quantization levels. what will be The bit transmission rate for the time-division multiplexed signal.

  What is the gain formula for a non inverting op amp

The LM358 op amp can be a single or dual supply op-amp. This mean that it can operate with just a single supply i.e. + 5 volt or with dual supplies i.e. (+ and -) 5 volt supplies. With a inverting configuration with dual supplies (+5v and -5v) bei..

  Find output signal y if the frequency responses are given

The signal x(t) = 2 - sin(4.5t - pi / 4) + 3 cos (24t + pi / 2) is input into a system with frequency response H(omega). Find the output signal y(t) if: H(omega) = rect(omega/80) H(omega) = 2 - 2rect(omega/8) H(omega) = sin c(omega/20)

  Design buttons using combinatorial logic gates and resistors

Design a circuit to capture the pressing of buttons (momentary switches). The circuit should have two LEDs "A" and "B", and two buttons, "A" and "B". Whichever button was last pressed should determine which of the two LEDs is lit.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd