Describe the metallic bonding present in aluminium and

Assignment Help Chemistry
Reference no: EM13644198

1. The elements sodium, aluminium, silicon, phosphorus, and sulfur are in period 3 of the periodic table.

2. Describe the metallic bonding present in aluminium and explain why aluminium has a higher melting point

3. Why does aluminum have a higher melting point than sodium?

Reference no: EM13644198

Questions Cloud

The mineral is pyroxene1 recalculate the analysis into : the mineral is pyroxene.1. recalculate the analysis into chemical formula.the formula should show the atoms of each
A heat pump is executed with r-134a under the saturation : a heat pump is executed with r-134a under the saturation dome between the pressure limits of 1.6 mpa and 0.2 mpa. if
The brakes of a truck cause it to slow down by applying a : the brakes of a truck cause it to slow down by applying a retarding force of 3.40 x 103 n to the truck over a distance
Air at 300 k and 200 kpa is throttled by a valve to : air at 300 k and 200 kpa is throttled by a valve to pressure of 100 kpa. if the valve is adiabatic and the change in
Describe the metallic bonding present in aluminium and : 1. the elements sodium aluminium silicon phosphorus and sulfur are in period 3 of the periodic table.2. describe the
Perform a hypothesis test to see if there is significant : a researcher in colorado is trying to improve plant growth. they want to see how combinations of different brands of
If the boy has three bricks weighing 10 lb each and throws : an 80-lb n boy sitting in a stationary 20-lb wagon wants to simulate rocket propulsion by throwing bricks out of the
A dolphin in 25degc sea water emits a sound directly toward : a dolphin in 25degc sea water emits a sound directly toward the bottom of the ocean 105 m below. how much time passes
An air conditioner running with r-134a on a cycle executed : an air conditioner running with r-134a on a cycle executed under the saturation dome between the pressure limits of 0.8

Reviews

Write a Review

Chemistry Questions & Answers

  Describe what is the ka for this acid

What is the percent ionization of a 1.3 M weak acid if the pH is 4.6. The pH of a 0.200 M solution of formic acid, HCOOH, is 2.38. What is the Ka for this acid

  Find out the empirical formula of a compound

Determine the empirical formula of a compound that is 32.79% Na,12.90% Al with the remainder F.If the molecular mass is approximately 200 amu

  Define what is the annual cost of operation

what is the annual cost of operation in a 70°F room if the door is opened 10 times a day with an average heat gain per opening of 200 kJ? How much would it cost to keep the inside at 35° F? Show work.

  Define the molarity of the acetic acid solution

25.00mL of an acetic acid solution requires 23.86mL of a 0.1550M potassium hydroxide solution to reach the endpoint. What is the molarity of the acetic acid solution

  Explain how to calculate ph for this reaction

The burning of 80.3 g of SiH4 at constant pressure gives off 3790 kJ of heat. Calculate ?H for this reaction.

  Explain the aqueous solubility of carbon monoxide

The aqueous solubility of carbon monoxide at 0.0C and 1.0 atm CO pressure is 0.0354 mg CO per mL of solution. What would be the molarity of CO in water at 0.0C and the observed partial pressure of CO in air(0.00036 atm)

  Explain whole bunch of different pe diagrams

whole bunch of different PE diagrams and I'm asked which one is the highest temperature dependent and which one is the lowest

  Compute the volume of the naoh needed

Calculate the volume of the NaOH needed to completely neutralize the acid in the flask. Calculate the pH for a) initial acid solution in the flask; b) the point at which 8mL of the base has been added; c) the equivalence point and d) the point in ..

  Define what is the ph of the buffer

a buffer solution is prepred by adding 5.50g of ammonium chloride and 0.0188 mol of ammonia to enough water to make 155mL of solution a) What is the pH of the buffer

  Explain occur in claisen-schmidt condensation mechanisms

Result in the formation of an aliphatic carboxylic Acid. Occur in Claisen-Schmidt condensation mechanisms

  State the optimum point to ensure the maximum yield of c

which is the desired product, can decompose to product F, how might you ensure that you stopped the reaction at the optimum point to ensure the maximum yield of C?

  What mass in grams of solid forms

57.0 mL of 3.50 M sodium hydroxide is combined with 35.0 mL of 1.80 M magnesium chloride. What mass in grams of solid forms?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd