Dertermine the final temperature of the water vapor

Assignment Help Mechanical Engineering

Reference no: EM13711533

Water in a vertical piston cylinder is heated at constant pressure of 10 bar. It is initially at 179.9 0C and has a specific volume of 0.1 m3/kg and is heated to a final specific volume of 0.248 m3/kg. Changes in kinetic and potential energies are zero. Determine:

a) the initial quality of the water

b) the final temperature of the water vapor

c) the work in kJ/kg

d) the initial and final internal energy in kJ/kg

e) the heat transfer in kJ/kg

Reference no: EM13711533

Questions Cloud

Change in enthalpy of oxygen as temperature changes : What is the change in enthalpy (in kJ/kg) of oxygen as its temperature changes from 29Â°C to 181Â°C? Assume an ideal gas with R = 0.2598 kJ/kg-K and a ratio of specific heats of 1.4.

Calculate range of typical machining time for face milling : Calculate the range of typical machining time for face milling a 10-in. long, 2-in. wide cutter with a depth of cut of 0.1-in , the cutter has 10 teeth .for the following work piece materials :1.low-carbon steel 2.titanium alloys 3.alumminum alloys 4..

Thermal conductivity and diffusivity of the plastic : A plastic coating is applied to wood panel by first depositing molten polymer on a panel and then cooling the surface of the polymer by subjecting it to air flow at 25oC. The heat of reaction associated with solidification of polymer may be neglected..

Determine the maximum vertical support reaction : Draw the quantitative influence line for the vertical support reaction at point A and determine the maximum vertical support reaction that can be developed at point.

Dertermine the final temperature of the water vapor : Water in a vertical piston cylinder is heated at constant pressure of 10 bar. It is initially at 179.9 0C and has a specific volume of 0.1 m3/kg and is heated to a final specific volume of 0.248 m3/kg. Changes in kinetic and potential energies are ze..

Determine the change in internal energy : 1 /2kg of a liquid-vapor water mixture in a rigid tank initially at 2 bar is heated by 120V heater for 5 minutes until it becomes a saturated vapor at 4 bar. Changes in kinetic and potential energies can be ignored.

Contribution of grain boundary strengthening in an alloy : Nan crystalline materials have grain sizes ranging from 0.01 to 0.1 microns. If the contribution of grain boundary strengthening in an alloy with grains of 0.1 microns is 20 MPa, what would you expect it to be if the grain size were reduced to 0.01 m..

Calculate the density and approximate modulus : A volume fraction f = 0.2 of silicon carbide (SiC) particles is combined with an aluminium matrix to make a metal matrix composite. The modulus of particle reinforced composites lies very close to the lower bound of Young's modulus for a composite.

Determine the mixture temperature leaving the mixing chamber : In air-conditioning systems, streams of cold and warm air are mixed to get air with the right temperature. Consider a mixing chamber into which cold air enters at 8C and 100 kPa at a rate of 0.55 m^3 /s and warm air enters at 300C and 100 kPa. The ra..

User Account

All Pages