Derermine the velocity and acceleration of point p

Assignment Help Civil Engineering
Reference no: EM13307263

At the instant shown, the helicopter is moving upwards with a velocity of 4 ft/s and has an acceleration a=2 ft/s^s. At the same instant the frame h, not the horizontal blade, rotates about a vertical axis with a constant angular velocity w=0.9 rad/s, measured relative to h, derermine the velocity and acceleration of point P, located on the end of the blade, at the instant the blade is in the vertical position.

Reference no: EM13307263

Questions Cloud

Consider the procedure described in adaptive playout delay : Consider the procedure described in "Adaptive Playout Delay" for estimating average delay di. Let r1 - t1 be the most recent sample delay, let r2 - t2 be the next most recent sample delay.
Determine her metabolic power : For exercise, a 60 kg athlete runs up a 10-m high hill in 30 seconds. Assume the efficiency of the human body is 25%. Determine her metabolic power
How the typical sources of business growth : Speculate on how the typical sources of business growth might evolve over the coming decade. Explicate how these changes might affect businesses in the industry you have selected for this course. Support your speculations with examples and discuss wh..
Create a student class which will contain the following : Demonstrate the correct working of your classes by reading in a collection of student records from a file, sort the records, and print them. If a name is "EOF" it will mark the end of the file.
Derermine the velocity and acceleration of point p : At the same instant the frame h, not the horizontal blade, rotates about a vertical axis with a constant angular velocity w=0.9 rad/s, measured relative to h
Why your program should require o(logn) time per order : The double action system operates as follows. When a new buy order of $x arrives it is simply stored for future use if none of the stored sell orders has an asking price lower than or equal to $x.
Determine the time it takes for the light to strike ground : Falling light. According to general relativity and the equivalence principle, light is bent by gravity. Determine the time it takes for the light to strike the ground
What was the initial concentration of cocl2 : What was the initial concentration of COCl2?
Particle of mass m in a uniform gravitational field : Consider a particle of mass m in a uniform gravitational field. Its potential energy is E(h) = mgh,where h is the height above sea level and g is the earth's gravitational constant, g = 9:8 m/s2.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate available water capacity

given bulk density as 1300kg/cubic meter and field capacity as 22% by weight and permanent wilting point as 10% by weight calculate available water capacity.

  Maximum volume of treated wastewater

Roughly what is the maximum Volume of treated wastewater should you put in the bottle if you want to have at least 2.0mg/l of DO at the test (filling the rest of the bottle with the water

  Determine what ph is required to precipitate of iron

what pH is required to precipitate all but 0.20 mg/L of iron from a raw water with an Fe 3+ concentration of 2.1 mg/L Assume the temperature is 25 C. The reaction isFe(OH)^3 = Fe + 3 OH^- and pKs= 38.57

  Determining the velocity of motor having constant power

A constant power of 1.5 hp is supplied to the motor while it operates with an efficiency of ε = 0.8. Determine the velocity of the 200-lb crate in 15 seconds, starting from rest. Neglect friction.

  Would recycle of return sludge increase the sludge age

if the sludge concentration in the return sludge line from the secondary clarifier were the same as the MLVSS concentration.WOULD recycle of return sludge increase the sludge age why

  Calculate the flow rate imprted by the impeller

A six bladed rushton turbine 2.0m in diameter rotating at 25 rev/min in a tank 4m deep, water temperature= 10 degree celcius. For this flocculation system calculate the following: a) Reynolds number

  Determine what is local acceleration along the centerline

velocity of water in the nozzle is given by V=2t/(1-.5x/L)^2. L = 4ft. When x=.5L and t=3s what is the local acceleration along the centerline. What is the convective acceleration.

  Shear and bending moment expressions

Show or formulate the shear and bending moment expressions for each board, and plot/draw the shear and bending moment diagrams of the boards.

  How much sodium hypochlorite-naocl must be added

One milligram per liter of hypochlorous acid (HOCl) is added to water to achieve disinfection of pathogenic bacteria. The disinfection potential of HOCl is 10 times greater than that of hypochlorite (OCl-).

  Estimate the rate of heat transfer from the compressor

50 kmol per hour of air is compressed from p1 = 1.2 bar to P2 = 6.0 bar in a steady-flow compressor. Delivered mechanical power is 98.8KW. Temperature and velocities are: T1= 300K T2= 520K u1= 10m s^-1 u2= 3.5m s^-1

  Find v and q by hazen-williams for a new cast iron pipe

The 12 in diameter cast iron pipe is 2000ft long, the water surface is El 200 in the reservoir on the left B. El 175 on the right. A. Find V and Q by hazen-williams for a new cast iron pipe (Chw=130) Neglect entrance, exit and local losses.

  Determine what was the major principal stress at failure

A consolidated-drained triaxial test on a normally consolidated clay yielded a friction angle of 28°. If the all-round confining pressure during the test was 140 kN/m2, what was the major principal stress at failure.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd