Demonstate the ability to use subroutines-math functions

Assignment Help Other Subject

Reference no: EM13252228

Purpose Demonstate the ability to use subroutines, math functions, and comparisons by simulating an HVAC control system Write a ladder program to accomplish the following

1- Provide all appropriate documentation including system design, memory map, process logic all I/O and rungs must be clear through comments The are no external field devices to sense temperature therefore

2- Create a simulated heat source using the green push button (1 push of a button = 1 degree higher)

3- Create a simulated cooling source using the red push button (1 push of a button = 1 degree lower)

4- Create a heating mode (the unit will only turn on the heater when TS1 is ON)

5- Create a cooling mode (the unit will only turn on the AC when TS1 is OFF)

6- Create a register to store the current room temperature at 70 degrees

7- Create 2 registers that contain an upper and lower temperature set point of 65 and 75 When the upper set point is reached (based on the internal simulated heating and cooling)

8- Turn on the AC (O:0/0) for ten seconds (only in cooling mode)

9- After ten seconds turn off the A/C and change the room temperature to 70 degrees simulating the room has cooled by 5 degrees When the lower set point is reached (based on the internal simulated heating and cooling)

10- Turn on the heater (O:0/1) for ten seconds (only in heating mode)

11- After ten seconds turn off the heater and change the room temperature to 70 degrees simulating the room has heated by 5 degree

12- Create an HVAC on/off mode In the off mode turn on the red light and the A/C and Heater will not function regardless of the temperature In the on mode turn on the yellow light and the unit should function.

Reference no: EM13252228

Questions Cloud

What was machine utilization : Oakwood Outpatient Clinic rents a magnetic resonance imaging (MRI) machine for 28 hours a month for use on its patients. Last month the machine was used 24 hours out of the month. What was machine utilization?

Find the total annual cost of holding inventory : The size of the first lot is 1600 units and the size of the second lot is 800 units. Find the total annual cost of holding inventory.

What writing tools do you use : What writing tools do you use and what conditions do you write - Intended as rough guidelines and triggers for thought-writing.

What is the value of n that could lead to the minimal delay : Consider a long wire represented as distributed RC sections. The total wire length is 5mm. To reduce the wire delay, we uniformly insert n buffers along the wire. Suppose r=12Ohms/m and c=0.2fF/m and the delay of each buffer is 1ns.

Demonstate the ability to use subroutines-math functions : Purpose Demonstate the ability to use subroutines, math functions, and comparisons by simulating an HVAC control system Write a ladder program to accomplish the following-Provide all appropriate documentation including system design, memory map, proc..

Linear programming case study : Linear Programming Case Study

What is the net upward force on an airplane wing : What is the net upward force on an airplane wing of area 27.8 m2 if the speed of air flow is 242 m/s across the top of the wing

What are the chief elements of the strategy : What are the chief elements of the strategy that Whole Foods Market is pursuing?

Ind the acceleration under the action of force farrowbold : A force Farrowbold applied to an object of mass m1 produces an acceleration of 3.40 m/s2. The same force applied to a second object of mass m2 produces an acceleration of1.60 m/s2. If m1 and m2 are combined into one object

User Account

All Pages