Demand for an annual printing of this particular product

Assignment Help Civil Engineering
Reference no: EM13555089

A large company in the communication and publishing industry has quantified the relationship between the price of one of itsproducts and the demand for this product as Price = 150- 0.01 x Demand for an annual printing of this particular product. The fixed costs per year (i.e., per printing) =$50,000 and the variable cost per unit =$40. What is the maximum profit that can be achieved if the maximum expected demand is 6,000 units per year? What is the unit price at this oint of optimal demand?

Reference no: EM13555089

Questions Cloud

Compute the initial and final moisture content of the clay : A 10,000 ft3 mass of saturated clay had a void ratio of 0.962 and a specific gravity of solids of 2.71. A fill was then placed over this clay, causing it to compress. However, the volume of the solids remained unchanged. After this was complete, the ..
How much water would it yield if the water declined : A 1.20-m thick strata of sand has a void ratio of 1.81. A contractor passes a vibratory roller over this extra strata, which densifies it and reduces its void ratio to 1.23. Compute its new thickness.
Draw a mass balance diagram and estimate the annual loss : Gasoline vapors are vented to the atmosphere when an underground gasoline storage tank is filled. If the tanker truck discharges into the top of the tank with no vapor control (known the splash fill method)the emission of the gasoline vapors is estim..
Find the distance downstream to the location : Water enters a very wide rectangular channel (Manning’s n = 0.0149) at a velocity of 12.2 ms-1 and a depth of 0.61 m. An H3 curve forms downstream and the water jumps to a depth of 2.4 m some distance downstream. Find the distance downstream to the l..
Demand for an annual printing of this particular product : A large company in the communication and publishing industry has quantified the relationship between the price of one of itsproducts and the demand for this product as Price = 150- 0.01 x
Determine the specific weight of the wood : A solid wooden cube (.5*.5*.5 m^3) is floating in water and 0.2 of the cube extends above the water surface. Determine the specific weight of the wood.
What is the volume of 1 g of pepper : One gram of pepper is placed into a 100 mL beaker, and the beaker is filled with water to the 100 mL mark. What is the concentration of pepper in mg/L? What should one assume in this problem? What is the density of pepper? What is the volume of 1 g o..
How much heat is added to the room during a 50-minute class : Normal human skin and clothing temperature indoors is approximately 30 o C. In order to maintain this temperature, one student sitting in a classroom gives off heat at a rate of 14 watts per degree K in temperature difference between the person and t..
What is the effective interest rate : A student bought a $75 used guitar and agreed to pay for with a single $85 payment at the end of the 6 months. assuming semiannual (every 6 months) compounding, what is the normal annual interest rate? what is the effective interest rate?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Is the plant in violation of the deq discharge limit

Immediately upstream of the treatment plant, the Pine River has an ultimate CBOD of 2 mg/L and a flow of 9 × 105 m3/day. At a distance of 20 km downstream of the treatment plant, the Pine River has an ultimate CBOD of 10 mg/L.

  What real-world considerations absent in the problem

The mayor proposes financing the museum with a lump-sum tax of $24 and then opening the museum free to the public. How many times would each person visit? Calculate the benefit each person would get from the musuem, measured as consumer surplus minus..

  Determining stress fort rigid bar of negligible weight

The rigid bar of negligible weight is supported as shown. Find the stress in each rod if the temperature rises DeltaT after a load P is applied. Use the following data: area of steal rod 320mm2, bronze rod 1300mm2, thermal expansion coefficient Al..

  How much carbon dioxide-co2 will be produced

How much oxygen (mg O2) is required to support the complete oxidation of 500 mg acetate (CH3COOH). How much carbon dioxide (CO2) will be produced

  Determine the speed of the car at o at constant speed

A car traveling over a hill at constant speed starts to lose contact with the ground at O. If the radius of curvature of the hill is 85 m, determine the speed of the car at O.

  How much work is required to pump all of the water

A circular swimming pool has a diameter of 18 m, the sides are 3 m high, and the depth of the water is 2.5 m. How much work (in Joules) is required to pump all of the water over the side

  What is the relative humidity for the final mixed parcel

Two parcels of air are mixed. The given properties of the two parcels and the final mixed parcel are as follows: parcel (1): volume = 1 Liter, Temperature = 10 Celsius, pressure = 1 atm, relative humidity = 50%, parcel (2): volume 1 Liter, Tempera..

  Duplex system with no redundancy

What is the salt usage for each regeneration if the system regenerated every 10 days? What size resin tanks (diameter, height) would be required for a duplex system with no redundancy?

  Calculate total metabolic heat generated by a singing canary

calculate the total metabolic heat generated by a singing canary taking into account heat transfer by radiation, convection and exhaling air. The air temperature is 20`C, canary's body internal and surface temperature is 33`C

  Determine what should the size of the gap at b be

The bar AB has an axial rigidity of EA. The bar is rigidly attached at A while there is a gap at B. A load P acts at point C and has a large enough magnitude to close the gap at B.

  Determine the total distance the particle travels during the

The acceleration of a particle as it moves along a straight line isgiven by a = (2t-1)m/s2 where t is in seconds. If s =1mand v =2m/s when t =0 determine the particles velocity and positionwhen t = 6s. Also determine the total distance the particle t..

  Required height of the roller coaster

Determine the required height h of the roller coaster so that when it is essentially at rest at the crest of the hill it will reach a speed v= 100km/hr when it comes to the bottom.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd