Define what stress will be necessary to the slip plane

Reference no: EM13316759

Consider a metal single crystal oriented such that the normal to the slip plane and the slip direction are at angles of 42.1* and 48.9*, respectively, with the tensile axis. If the critical resolved shear stress is 18.2 MPa (3000 psi), will an applied stress of 40 MPa (6500 psi) cause the single crystal to yield? If not, what stress will be necessary?

Reference no: EM13316759

Questions Cloud

Determine the mass flow rate through the system : A Brayton cycle with a regenerator uses air as the working fluid. The air enters the compressor at 283K and 0.1 MPa. The highest temperature in the cycle is 1073K and the pressure ratio across the compressor is 8.

Discuss the risks of having a single root user : Discuss the risks of having a single root user and how more limited management abilities can be given to others users on Linux/UNIX systems. Include a sample generic policy for a limited user from which a configuration could be written.

Design and implement a program that will be run each day : The task requires the development of a single processor program that can subsequently be converted into a multi processor program after the testing of the single processor program is complete.

Maximum deductible contribution : What is the maximum deductible contribution that can be made to one or more deductible IRAs in each of the following instances?

Define what stress will be necessary to the slip plane : Consider a metal single crystal oriented such that the normal to the slip plane and the slip direction are at angles of 42.1* and 48.9*, respectively, with the tensile axis.

What is the angular misclosure of a seven sided closed-loop : What is the angular misclosure of a seven sided closed-loop traverse with measured angles of G B=132°08’23”, A C=133°35’18”, B D=127°15’08”, C E=123°28’37”, D F=99°55’13”, E G =129°09’49”, and F A=154°26’57”. Adjust the angles to eliminate the misclo..

Determine the subsidence of the clay surface : groundwater is pumped for domestic use from an unconfined aquifer. the thickness of the clay is 40%. after 10 years of pumping, the porosity is reduced to 30%. determine the subsidence of the clay surface.

Find the angular misclosure and the adjusted azimuths : The azimuth from station A of a closed traverse to a control point T1 is 233°12’36”. The azimuth from the last station of the traverse (station G) to a control point T2 is 213°12’15”.

Calculate the time average f of the total force tangent : Calculate the time average F of the total force tangent to the toad exerted on the tires during the 8 s. Treat the car as a particle and neglect air resistance.

User Account

All Pages