Define aqueous solutions in order of increasing ph

Assignment Help Chemistry
Reference no: EM13227961

Without doing detailed calculation, arrange the following 0.10 M aqueous solutions in order of increasing pH. Explain your ordering.

HCl
CH3COOH
KCl
H3PO4
NH3
H2SO4
NH4NO3
KOH

Reference no: EM13227961

Questions Cloud

Calculate power radiated by the antenna : A half wave dipole antenna is operating in air at a frequency of 100 MHz. At a distance of 1000 km and at an observation point ? = ?/2, electric field strength is measured to be 5 µV/m. Calculate the  a. Length of the antenna
Discuss the advisability of using modular assemblies : Discuss the advisability of using modular assemblies in manufacturing. (What are the advantages and disadvantages?) To what extent can these arguments be applied to service products?
Business-internal service system : Business-Internal Service System. Customers receiving the service are internal to the organization providing the service.
What is the potential increase in labor productivity : an operation has a 10% scrap rate. as a result, 72 pieces per hour are produced. what is the potential increase in labor productivity that could be achieved by eliminating the scrap?
Define aqueous solutions in order of increasing ph : Without doing detailed calculation, arrange the following 0.10 M aqueous solutions in order of increasing pH. Explain your ordering.
Give appropriate analog signal conditioning to interface adc : A calibrated RTD with alpha = 0. 0041 / degree C, R = 306. 5 ohm at 20 degree C, and PD = 30 mW / degree C will be used to measure a critical reaction temperature. Temperature must be measured between 50 degree and 100 degree C.
Discuss how technological innovation resulted in change : discuss how technological innovation resulted in change within your organization, whether it concerned processes, new products or services, or the technology itself (i.e. seminars to webinars). How does your organization compare with others within..
What does the concept of interactive design mean : What does the concept of interactive design mean for a service such as the adventure playground described here?
Explain all reacionts in order of increasing tendency : For each reaction, identify the acid-base conjugate pairs. Then rank all reacionts in order of increasing tendency for the reaction to go to completion (to the right)

Reviews

Write a Review

Chemistry Questions & Answers

  Define how many photons will travel through the pinhole

The diameter of the laser beam is 5.5 mm. If the laser is pointed toward a pinhole with a diameter of 1.2 mm, how many photons will travel through the pinhole per second?

  Calculate the ph

Calculate the pH after 0.15 mol of NaOH is added to 1.00 L of 0.60 M HF and 1.01 M KF.

  What is the maximum power can generated by the turbine

Assuming the turbine is well insulated, what is the maximum power that can be generated by the turbine?

  How much heat is absorbed in the formation

How much heat is absorbed in the formation of 1.69 mol of NO? Answer units KJ

  What is the final temperature

A 70.6 L constant-volume cylinder containing 7.44 g Hg is heated until the pressure reaches 3.80 atm. What is the final temperature in degrees Celsius?

  Calculate the vapor pressures of pure a and b

at 84 degrees C the total vapor pressure of a solution contains 1.2 moles A and 2.3 moles B is 331 mmHg. Upon the addition of another mole of B to the solution, the vapor pressure increasing to 347mmHg.

  State titration of the newly freed edta required

Titration of the newly freed EDTA required 18.0 mL of 0.0210 M Ca2 . What were the molarities of Cd2 and Mn2 in the original solution?

  How many moles of gas were added

A gas sample containing 1.65 mol at 25°C exerts a pressure of 413 torr. Some gas is added to the same container, and the temperature is increased to 50.°C.

  Common groundwater pollutant in the corn-producing regions

Atrazine is an herbicide widely used for corn and is a common groundwater pollutant in the corn-producing regions of the United States. The log Kow for atrazine is 2.65.

  Explain the specific heats of liquid and gaseous methane

Assume no heat is lost to the surroundings. The normal boiling point of methane is -161.5 C. The specific heats of liquid and gaseous methane are 3.48 and 2.22 J/g.K, respectively. A)liquid B)gaseous C)solid

  What are the total pressure in the flask

What are the total pressure in the flask and the partial pressure of HOF after exactly 30 minutes and  After 45 minutes If the partial pressure of HOF in a 1.00-L flask is initially1.00 × 10 2 mm Hg at 25 °C?

  Explain what is the mole fraction of butanol

What is the mole fraction of butanol (MM = 74.12 g/mol, D = 0.810 g/mL) when 32.94 mL of butanol is mixed with 20.43 mL of ethanol

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd